Shop
Showing 121–140 of 173 results
Sort:
Enerpac 803491 30-Ton Cylinder w/ P392 Hand Pump
Enerpac 803491 with 30-Ton Cylinder w/P392 Hand Pump. Order #: SCH-302H. Mfg #: 803491
$1,037.00
$1,037.00
Enerpac NC3241 Hydraulic Nut Cutter
Enerpac NC3241 eliminates industrial nut removal hurdles through a 21.8-ton force capacity and hardened tool steel hardware for robust maintenance in confined spaces.
- Nut Capacity (Hex): 1.25" to 1.63" (32 mm to 41 mm)
- Force Capacity: 21.8 Tons (194 kN)
- Maximum Pressure: 10,000 PSI (700 bar)
- Blade Hardware: Hardened tool steel construction
- System Logic: Single-acting spring return
$1,728.00
$1,728.00
Enerpac PUD1301B Electric Hydraulic Pump
Enerpac PUD1301B eliminates hydraulic lift synchronization drift via a high-speed two-stage pump and a 10-foot remote pendant to ensure robust maintenance lifting audits.
- Pressure Capacity: 10,000 PSI (700 bar) Maximum
- Valve Architecture: 3-way, 2-position (3/2) Dump Valve
- Control Interface: 10-foot remote pendant for operation
- Flow Architecture: Two-stage pump for rapid advance cycles
- Safety Logic: Thermal overload protection with manual reset
$1,555.00
$1,555.00
Enerpac PUJ-1200E Hydraulic Electric Pump
Enerpac PUJ-1200E resolves international high-pressure hydraulic hurdles through a 230V power configuration and two-speed economy design to minimize cycle times in offshore maintenance audits.
- Electrical Spectrum: 230V International power configuration
- Valve Architecture: 3-way, 2-position (3/2) manual valve
- Metrological Logic: Internal bypass prevents over-pressurization
- Reservoir Material: Lightweight high-thermal stability composite
- Flow Architecture: 2-speed design for optimized cycle times
$1,426.00
$1,426.00
Enerpac PUJ1200B Economy Pump w/ 3-Way Valve
Enerpac PUJ1200B overcomes hydraulic lift synchronization hurdles via a high-speed two-stage pump and lightweight aluminum reservoir to ensure robust performance in intermittent maintenance cycles.
- Maximum Pressure: 10,000 PSI (700 bar)
- Power Source: 115 VAC, 50/60 Hz (0.5 hp)
- Valve Architecture: 3-way, 2-position manual dump valve
- Flow Rate: 20 in³/min @ 10,000 PSI
- Safety Logic: Integrated thermal overload protection
$1,469.00
$1,469.00
Enerpac RAC-1006 Single Acting Aluminum Cylinder
Enerpac RAC-1006 eliminates heavy lift synchronization drift through a high-strength aluminum 100-ton cylinder and hard-coat anodizing to deliver robust load verification in the field.
- Cylinder Capacity: 100 Tons (896 kN)
- Stroke Length: 5.91 inch (150 mm) linear displacement
- Return Type: Single-acting Spring Return
- Material Integrity: Hard-coat Anodized Aluminum construction
- Oil Capacity: 121.9 cubic inches (1997 cm³)
$1,685.00
$1,685.00
Enerpac RACH604 Hollow Aluminum Cylinder
Enerpac RACH-604 overcomes field tensioning hurdles through a lightweight hollow-plunger design and high-strength aluminum construction for robust load displacement audits.
- Force Capacity: 60 Ton (596 kN) spring return
- Stroke Length: 4 inch (101 mm) high-fidelity displacement
- Plunger Architecture: Hollow design for pulling and tensioning
- Weight Efficiency: Aluminum build (40% lighter than steel)
- Safety Hardware: Integrated internal safety relief valve
$1,598.00
$1,598.00
Enerpac RCH-603 60-Ton Hollow Plunger Cylinder
Enerpac RCH-603 with 60-Ton Hollow Plunger Cylinder. Order #: RCH-603. Mfg #: RCH-603
$1,080.00
$1,080.00
Enerpac W2000PX Low Profile Hydraulic Wrench
Enerpac W2000PX eliminates heavy industrial bolting synchronization hurdles via a 360-degree swivel drive and precision ratchet mechanism for high-fidelity torque audits.
- Torque Capacity: 2,000 ft.lb (2712 N-m) maximum output
- Drive Architecture: 3/4" Square Drive with 360° x 180° swivel
- Accuracy Class: ± 3% across the full stroke
- Operational Logic: Fine-tooth ratchet for rapid cycle audits
- Structural Integrity: Compact high-strength steel uni-body
$1,598.00
$1,598.00
Enerpac W2000X Low Profile Hexagon Torque Wrench
Enerpac W2000X tackles heavy-duty bolting synchronization drift through a low-profile hexagon design and 360-degree swivel manifold to ensure robust torque precision in confined industrial zones.
- Torque Capacity: 2,000 ft-lb (2,712 Nm)
- Accuracy Class: ±3% across full stroke
- Hexagon Size Range: 1-1/16" to 2-3/8" (27 mm to 60 mm)
- Operating Pressure: 10,000 PSI (700 bar) maximum
- Material Integrity: Nickel-plated high-strength steel alloy
$1,512.00
$1,512.00
Enerpac ZA4408MX Air Hydraulic Pump, 1.75 Gallon Reservoir
Enerpac ZA4408MX optimizes heavy-duty cycle times for hydraulic pressure pumps through Z-Class high-efficiency air-driven operation and 1.75-gallon reservoirs for continuous industrial tool power.
- Construction: Z-Class air-driven high-efficiency pump
- Accuracy: Dual internal overload relief valves
- Interface: Sight gauge 1.75-gallon reservoir
- Range: Two-speed high-flow oil operation
- Application: Reducing industrial tool cycle times
$2,592.00
$2,592.00
Enerpac ZUTP1500B Electric Tensioner Pump, 21,750 PSI
Enerpac ZUTP1500B eliminates mechanical bolting fatigue by providing a high-pressure hydraulic tensioner pumps solution for consistent, high-load bolt tensioning in demanding industrial environments.
- Construction: Electric driven high-pressure pump
- Accuracy: Constant 21,750 PSI rating
- Interface: 110V universal electric motor
- Range: 1500 Bar maximum pressure
- Application: Powering hydraulic bolt tensioners
$4,838.00
$4,838.00
Enerpac ZUTP1500SB Electric Tensioner Pump w/ Solenoid Valve
Enerpac ZUTP1500SB optimizes bolting workflows through remote solenoid actuation for hydraulic tensioner pumps, allowing technicians to maintain safe distance during heavy-duty pressure cycles.
- Construction: Solenoid valve tensioning pump
- Accuracy: Precise remote valve operation
- Interface: Pendant-operated remote solenoid control
- Range: Rated 21,750 PSI pressure
- Application: Remote heavy-duty bolt tensioning
$4,190.00
$4,190.00
Fluke 700HPM High Press Pneumatic Calibration Manifold
Fluke Calibration 700HPM with High Pressure Pneumatic Calibration Manifold, 3000 psi. Order #: 700HPM. Mfg #: 4810481
$734.00
$734.00
Fluke 700HPP High Pressure Pneumatic Pump 3000psi – 4810501
Economy Electric Hydraulic Pump eliminates industrial lifting synchronization drift through a universal motor architecture that operates as low as 60 Volts to maintain robust load control.
- Motor Type: 115 VAC 50/60Hz Universal Motor
- Operation Mode: Two-speed design to reduce cycle times
- Valve Versatility: 3-way or 4-way for single/double-acting cylinders
- Remote Interface: 10-ft cord with 24 VAC remote control
- Duty Cycle: Designed for intermittent industrial duty
$1,339.00
$1,339.00
Fluke 700HPPK High Pressure Pneumatic Test Pump
Fluke 700HPPK eliminates pneumatic signal stability hurdles via an in-line contamination filter and dual-speed pump architecture for high-accuracy 3,000 psi industrial auditing.
- Pressure Range: 0 to 3,000 PSI (210 bar)
- Media Compatibility: Clean Air or Nitrogen
- Resolution: 0.1 PSI (7 mbar) fine adjustment
- Design: Portable rugged case with built-in manifold
- Hardware Material: 316 Stainless Steel and Aluminum
$1,987.00
$1,987.00
Fluke 700HTPK2 Premium Hydraulic Test Pump Kit – 4623314
Fluke 700HTPK2 with Premium Hydraulic Test Pump Kit. Order #: 700HTPK2. Mfg #: 4623314
$734.00
$734.00
Fluke P5510-2M Pneumatic Test Pump Vacuum to 2Mpa – 4185651
Fluke P5510-2M (4185651) overcomes laboratory measurement drift through a bench-mount dual-capability design and high-quality needle valves for stationary process diagnostics.
- Mounting Type: Bench Mount Laboratory Design
- Dual Capability: Integrated Pressure and Vacuum Source
- Control Hardware: High-quality needle valve for fine control
- Connection Interface: Tool-free / No PTFE tape required system
- Internal Source: Built-in High-performance Hand Pump
$1,210.00
$1,210.00
Fluke P5514-70M Hydraulic Test Pump 10K PSI – 4185672
Fluke - Pressurements P5514-70M with Hydraulic Test Pump, 70Mpa (10KPsi). Order #: P5514-70M. Mfg #: 4185672
$778.00
$778.00
Fluke P5514-70M-EP Hydraulic Comparison Pump 10K PSI
Fluke Calibration P5514-70M-EP with Hydraulic Comparison Pump, EP Seals - 10,000 PSI. Order #: P5514-70M-EP. Mfg #: 4185685
$821.00
$821.00
