Showing 141–160 of 173 results
Sort:
Fluke P5515-140M Hydraulic Test Pump 140 MPa 20K PSI
Fluke P5515-140M features 20,000 psi precision using Viton-sealed hydraulic test pumps with integrated hand priming for rapid and accurate pressure point setting in field environments.
- Construction: Sturdy base bench-top unit
- Accuracy: Heavy-duty screw press precision
- Interface: Integrated hand priming pump
- Range: 0 to 20,000 PSI
- Application: Mineral oil water calibration
$2,851.00
$2,851.00
Fluke P5515-140M-EP Hydraulic Comparison Pump 20K PSI
Fluke P5515-140M-EP delivers 20,000 psi dominance using specialized hydraulic comparison pumps with EP seals for safe calibration involving aggressive phosphate ester and Skydrol fluids.
- Construction: Acrylic reservoir portable design
- Accuracy: Fine adjustment screw press
- Interface: Ethylene Propylene EP seals
- Range: 0 to 20,000 PSI
- Application: Aggressive chemical fluid calibration
$2,894.00
$2,894.00
Mark-10 ESM1500FG Motorized Force Test Stand 1500lb Standard
Mark-10 ESM1500FG prevents component failure by utilizing motorized force test stands with deep specimen support and automated cycle testing to ensure material strength compliance.
- Construction: Standard clearance motorized frame
- Accuracy: ±0.002 inch position precision
- Interface: Load holding cycle testing
- Range: 1,500 lbF capacity
- Application: Large specimen break-force analysis
$3,024.00
$3,024.00
Mark-10 ESM1500LC Motorized Force Test Stand 1500lb Low Clearance
Mark-10 ESM1500LC streamlines mechanical verification workflows using low-clearance force test stands with high-speed travel and digital connectivity to maximize testing throughput for industrial components.
- Construction: Low clearance motorized frame
- Accuracy: ±0.002 inch position precision
- Interface: USB RS-232 Mitutoyo outputs
- Range: 1,500 lbF capacity
- Application: Precision tension compression testing
$3,024.00
$3,024.00
Mark-10 ESM1500SFG Motorized Force Test Stand 1500lb Short
Mark-10 ESM1500SFG delivers high-fidelity 0.0001-inch resolution for motorized force test stands, ensuring laboratory-grade precision for mechanical testing of springs and high-capacity fasteners.
- Construction: Short column standard clearance height
- Accuracy: 0.0001-inch position resolution precision
- Interface: Digital control panel load display
- Range: 1,500 lbF 6.7kN capacity
- Application: Compact laboratory spring fastener testing
$2,808.00
$2,808.00
Mark-10 ESM1500SLC Motorized Force Test Stand 1500lb Short/Low
Mark-10 ESM1500SLC eliminates vertical overhead space constraints by providing motorized force test stands oversight for high-capacity laboratory testing in compact benchtop optimized workspaces.
- Construction: Short column low clearance height
- Accuracy: Integrated encoder travel limit programming
- Interface: Benchtop optimized integrated encoder system
- Range: 6.5-inch 165mm travel range
- Application: Limited vertical overhead laboratory space
$2,808.00
$2,808.00
Mark-10 ESM750SFG Motorized Test Stand
Mark-10 ESM750SFG optimizes high-precision break testing workflows using motorized force stands with modular cycling and elongation modes to maximize productivity in automated production line environments.
- Construction: Integrated removable electronics enclosure
- Accuracy: High-precision elongation break analysis
- Interface: Password protected 50 profiles
- Range: 750 lbF 3.4 kN
- Application: Automated production line testing
$2,376.00
$2,376.00
Mark-10 ESM750SLC Motorized Test Stand
Mark-10 ESM750SLC features superior 750 lbF capacity for motorized force stands, delivering ±0.1% speed accuracy to ensure repeatable tension and compression results for ISO/ASTM laboratory testing.
- Construction: Stepper motor single-column frame
- Accuracy: ±0.1% speed position precision
- Interface: FollowMe manual crosshead positioning
- Range: 750 lbF tension compression
- Application: ISO ASTM laboratory testing
$2,376.00
$2,376.00
Meriam HPT-KIT Hydro/Pneumatic Test Kit Complete
Meriam HPT-KIT prevents pipeline integrity failure by utilizing hydro-pneumatic test kits to replace mechanical dead-weight testing with automated NIST-traceable digital pressure reports and real-time monitoring.
- Construction: Specialized hydrostatic pneumatic pipeline tool
- Accuracy: NIST-traceable digital pressure measurement precision
- Interface: Automated PDF and Excel reporting
- Range: Live record and review modes
- Application: Pipeline asset integrity management testing
$7,128.00
$7,128.00
Plarad MX-EC 75TS Electric Torque Wrench
Plarad MX-EC 75TS prevents fastener failure in extreme oil and gas environments by providing high-strength hydraulic torque wrenches that deliver repeatable 7,500 Nm accuracy.
- Construction: Compact mono-body alloy design
- Accuracy: Repeatable ±3% torque precision
- Interface: 360-degree rotatable swivel connection
- Range: Up to 7,500 Nm
- Application: Oil gas power generation
$2,333.00
$2,333.00
