Showing 41–60 of 179 results
GW Instek APS-7100 1000VA AC Power Source
GW Instek APS-7100 optimizes overall data acquisition throughput for critical Production Test & Worldwide Power Simulation applications protecting delicate tracking parameters from external ambient and physical disruptions.
- 1000 VA Power Capacity guarantees secure standard.
- 0 - 155 Vrms / 0 -.
- 45 Hz to 500 Hz Frequency Range.
- < 0.5% THD supports professional bench workflows.
- > 3 Crest Factor maintains industrial standard.
GW Instek GPD-2303S 180W Programmable Linear DC Supply
GW Instek GPD-2303S streamlines technical verification parameters within specialized Laboratory R&D & Automated Production Test workflows delivering stable threshold detection parameters for critical hardware validation profiles.
- 180 W Total Power Capacity.
- 2 Channels Output Channels maintains industrial standard.
- Independent, Series, and Parallel modes Tracking Support.
- Voltage: 0.5% + 2 digits / Current:.
- Save/Recall setup memory Memory optimizes hardware standard.
GW Instek GPD-3303S Programmable Linear DC Power Supply
GW Instek GPD-3303S safeguards fragile measurement loops inside standard Microcontroller & Analog Circuit Prototyping infrastructures minimizing standard calculation uncertainties in production-level testing cells.
- 3 Isolated Channels Output Channels.
- < 1 mVrms / < 3 mArms.
- 1 mV Voltage resolution maintains industrial standard.
- Individual Output On/Off for each channel Output.
- CE Certified Safety Standard delivers precise standard.
GW Instek GPD-4303S Programmable Linear DC Power Supply
GW Instek GPD-4303S maintains rigid electrical path isolation throughout continuous Complex Multi-rail Digital Design Verification processes preserving multi-frequency signal integrity for down-stream diagnostic nodes.
- 4 Isolated Channels Output Channels.
- 1 mV / 1 mA Resolution.
- USB Standard Programming interface supports professional standard.
- Series and Parallel tracking support Tracking Mode.
- 4 sets of Save/Recall states Memory.
GW Instek GPR-3510HD 0-35V DC Power Supply
GW Instek GPR-3510HD supports professional laboratory teams managing high-priority Industrial Automation & High-load DC Powering setups allowing engineering facilities to maintain complete traceability under full operational loads.
- 0 - 35 V / 0 -.
- High-efficiency Linear Regulation Design Architecture.
- < 0.01% + 5mV Stability.
- < 1 mVrms RMS Noise.
- Integrated terminals for cable loss correction Remote.
GW Instek GPS-1850D 18V/5A Digital DC Power Supply
GW Instek GPS-1850D resolves common instrumentation bottlenecks during localized Semiconductor Testing & Component R&D configurations to eliminate structural measurement drift across intensive hardware evaluation cycles.
- 0 - 18 V / 0 -.
- Linear Series Regulation Regulation Type.
- < 100 µs Recovery Time.
- V/A Dual display Digital Meter.
- Short-circuit and reverse polarity protection Safety Features.
GW Instek GPS-3030D 0-30V Dual Display Power Supply
GW Instek GPS-3030D optimizes overall data acquisition throughput for critical General Purpose Bench Testing & Education applications ensuring compliance with current US metrology standards and laboratory protocols.
- 0 - 30 V / 0 -.
- Dual Analog Meter / 3.5-digit LED Display.
- Line: 0.01% + 3mV / Load: 0.01%.
- < 0.5 mVrms Ripple & Noise.
- Constant Voltage and Constant Current Operation Mode.
Hioki 3269 4-Channel Sensor Power Supply
Hioki E.E. Corporation 3269 resolves common instrumentation bottlenecks during localized Multi-channel Current Probe Monitoring configurations protecting delicate tracking parameters from external ambient and physical disruptions.
- 4-Channel Sensor Power Supply Type.
- Short-circuit and overload indicators Protection.
- Low-noise linear regulator architecture Design.
- Japan Country of Origin delivers precise standard.
- High precision engineering parameters applied.
Hioki 3272 Single Sensor Power Supply
Hioki E.E. Corporation 3272 executes high-fidelity signal mapping during intensive Powering Hioki Current Probes diagnostic routines delivering stable threshold detection parameters for critical hardware validation profiles.
- Single Sensor Power Supply Type.
- 1-Channel Outputs sustains reliable system performance.
- 100 - 240 VAC Input Voltage.
- Japan Country of Origin supports professional standard.
- High precision engineering parameters applied.
Keysight 11716C SMA Interconnect Kit
Keysight Technologies 11716C safeguards fragile measurement loops inside standard Series Configuration of Multiple Step Attenuators infrastructures allowing engineering facilities to maintain complete traceability under full operational loads.
- SMA Interconnect Kit Type maintains industrial standard.
- DC to 26.5 GHz Frequency Range.
- Keysight 8494/95/96/97 Attenuators Compatibility delivers precise standard.
- Rigid interconnect cables and mounting bracket Components.
- < 1.15 to 18 GHz / <.
Keysight 33210U-002 8k-Point Arbitrary Waveform Upgrade
Keysight Technologies 33210U-002 safeguards fragile measurement loops inside standard Custom Signal Simulation & Pattern Generation infrastructures to eliminate structural measurement drift across intensive hardware evaluation cycles.
- 8k-Point Arbitrary Waveform Upgrade Type.
- Keysight 33210A Function Generator Compatibility.
- Upgrades to 8,192 points per waveform Memory.
- 14-bit Vertical Resolution optimizes hardware interface parameters.
- 50 MSa/s Sample Rate guarantees secure standard.
Keysight 33502A 2-Channel 50Vpp High Voltage Amplifier
Keysight Technologies 33502A supports professional laboratory teams managing high-priority Piezoelectric Driver, MEMS, and Medical Test setups to secure absolute baseline data accuracy and minimize diagnostic overhead.
- 2 Independent Channels Channels ensures strict standard.
- 50 Vpp / 40 Vpp Output Voltage.
- DC to 100 kHz Bandwidth.
- > 20 V/µs Slew Rate.
- x10 Fixed Gain delivers precise system calibration.
Keysight 33502A-001 Rear Output Channels Option
Keysight Technologies 33502A-001 resolves common instrumentation bottlenecks during localized ATE System Integration & Rack Cable Management configurations protecting delicate tracking parameters from external ambient and physical disruptions.
- Rear Output Channels Option Type.
- Keysight 33502A 50Vpp Amplifier Compatibility.
- Relocates BNC connectors to rear panel Function.
- Identical to front panel performance Signal Path.
- Dual-Channel support Configuration verifies operational baseline metrics.
Keysight 33512B-A6J ANSI Z540-1-1994 Calibration
Keysight Technologies 33512B-A6J optimizes overall data acquisition throughput for critical Regulatory Compliance & Metrology Integrity applications providing clean, noise-free interface matching for architectural verification loops.
- Accredited Calibration Service Type guarantees secure standard.
- ANSI/NCSL Z540-1-1994 Compliant Standard sustains reliable standard.
- 33512B Instrument ensures strict metrological compliance.
- As-Found and As-Left Measurement Report Data Provided.
- NIST / PTB / National Standards Traceability.
Keysight 34946A Dual 1×2 SPDT Microwave Switch for 34980A
Keysight Technologies 34946A supports professional laboratory teams managing high-priority Automated Test System RF Front-end setups to secure absolute baseline data accuracy and minimize diagnostic overhead.
- Dual 1x2 SPDT Microwave Switch Module Module.
- Keysight 34980A LXI Mainframe Mainframe Req.
- Depends on switch option Max Frequency.
- SCPI over LAN/USB/GPIB Control Interface.
- On-board switch counter for maintenance Features.
Keysight 34946A-004 2 x N1810TL 4GHz Terminated Switches
Keysight Technologies 34946A-004 resolves common instrumentation bottlenecks during localized Standard RF and Communication Device Testing configurations protecting delicate tracking parameters from external ambient and physical disruptions.
- DC to 4 GHz Frequency Range.
- 2 x N1810TL Switch Config.
- < 0.35 dB @ 4 GHz Insertion.
- > 80 dB @ 4 GHz Isolation.
- < 1.25 @ 4 GHz SWR.
Keysight 34946A-020 2 x N1810TL 20GHz Terminated Switches
Keysight Technologies 34946A-020 optimizes overall data acquisition throughput for critical Precision RF Signal Routing with Low Reflection applications providing clean, noise-free interface matching for architectural verification loops.
- DC to 20 GHz Frequency Range.
- 2 x N1810TL Switch Config.
- < 0.6 dB @ 20 GHz Insertion.
- > 60 dB @ 20 GHz Isolation.
- < 1.6 @ 20 GHz SWR.
Keysight 34946A-026 2 x N1810TL 26.5GHz Terminated Switches
Keysight Technologies 34946A-026 addresses strict calibration tolerance limits inside active Reflected Wave Minimization for Sensitive RF Path environments sustaining long-term system repeatability during rigorous benchmarking schedules.
- DC to 26.5 GHz Freq Range.
- 2 x N1810TL Switch Config.
- Internal 50 Ω load on unused port.
- < 1.7 @ 26.5 GHz SWR.
- > 50 dB @ 26.5 GHz Isolation.
Keysight 34947A Triple 1×2 SPDT Microwave Switch Module
Keysight Technologies 34947A executes high-fidelity signal mapping during intensive Building Block for Multi-GHz Signal Routing Racks diagnostic routines delivering stable threshold detection parameters for critical hardware validation profiles.
- Triple 1x2 SPDT Microwave Switch Module Module.
- Keysight 34980A Multifunction Switch/Measure Mainframe Req.
- Supports up to 3 individual microwave switches.
- Standard LXI/Ethernet Control Interface verifies operational standard.
- BenchVue compatible / SCPI command set Software.
Keysight 34947A-004 3 x N1810UL 4GHz Unterminated Switches
Keysight Technologies 34947A-004 integrates seamlessly into automated Low-Frequency RF Communication Testing system architectures minimizing standard calculation uncertainties in production-level testing cells.
- DC to 4 GHz Freq Range.
- 3 x N1810UL Switch Config.
- < 0.35 dB @ 4 GHz Insertion.
- > 80 dB @ 4 GHz Isolation.
- < 1.25 at 4 GHz SWR.