Showing 21–40 of 54 results
GW Instek GPD-4303S Programmable Linear DC Power Supply
GW Instek GPD-4303S maintains rigid electrical path isolation throughout continuous Complex Multi-rail Digital Design Verification processes preserving multi-frequency signal integrity for down-stream diagnostic nodes.
- 4 Isolated Channels Output Channels.
- 1 mV / 1 mA Resolution.
- USB Standard Programming interface supports professional standard.
- Series and Parallel tracking support Tracking Mode.
- 4 sets of Save/Recall states Memory.
GW Instek GPR-1810HD Digital DC Power Supply 18V/10A
GW Instek GPR-1810HD streamlines technical verification parameters within specialized DC power delivery workflows sustaining long-term system repeatability during rigorous benchmarking schedules.
- 18 V / 10 A Power Output.
- Constant Voltage and Constant Current Operation Operating.
- 0.01% High Regulation accuracy Regulation.
- 3 1/2 Digits 0.5" LED Display Display.
- Overload and Reverse Polarity Protection Protection.
GW Instek GPR-30HIOD Linear DC Power Supply 300V/1A 300W
GW Instek GPR-30HIOD serves as a primary benchmarking asset for advanced DC power module automation operations to secure absolute baseline data accuracy and minimize diagnostic overhead.
- 0 ~ 300 V | 0 ~.
- 3 1/2 Digit 0.5" LED Display Display.
- Constant Voltage and Constant Current Operation Regulation.
- Internal Select for Continuous or Dynamic Load;.
- Overload and Reverse Polarity Protection Safety Mechanism.
GW Instek GPR-3510HD 0-35V DC Power Supply
GW Instek GPR-3510HD supports professional laboratory teams managing high-priority Industrial Automation & High-load DC Powering setups allowing engineering facilities to maintain complete traceability under full operational loads.
- 0 - 35 V / 0 -.
- High-efficiency Linear Regulation Design Architecture.
- < 0.01% + 5mV Stability.
- < 1 mVrms RMS Noise.
- Integrated terminals for cable loss correction Remote.
GW Instek GPS-1830D Digital DC Power Supply 18V/3A
GW Instek GPS-1830D integrates seamlessly into automated DC power delivery system architectures protecting delicate tracking parameters from external ambient and physical disruptions.
- 18 V / 3 A Power Output.
- Constant Voltage and Constant Current Operation Operating.
- 0.01% High Regulation; Low Ripple and Noise.
- Series or Parallel Operation Function Scalability.
- Remote Control for External Programmable; Internal Select.
GW Instek GPS-1850D 18V/5A Digital DC Power Supply
GW Instek GPS-1850D resolves common instrumentation bottlenecks during localized Semiconductor Testing & Component R&D configurations to eliminate structural measurement drift across intensive hardware evaluation cycles.
- 0 - 18 V / 0 -.
- Linear Series Regulation Regulation Type.
- < 100 µs Recovery Time.
- V/A Dual display Digital Meter.
- Short-circuit and reverse polarity protection Safety Features.
GW Instek GPS-3030D 0-30V Dual Display Power Supply
GW Instek GPS-3030D optimizes overall data acquisition throughput for critical General Purpose Bench Testing & Education applications ensuring compliance with current US metrology standards and laboratory protocols.
- 0 - 30 V / 0 -.
- Dual Analog Meter / 3.5-digit LED Display.
- Line: 0.01% + 3mV / Load: 0.01%.
- < 0.5 mVrms Ripple & Noise.
- Constant Voltage and Constant Current Operation Mode.
GW Instek GPS-3030D Digital DC Power Supply 30V/3A
GW Instek GPS-3030D resolves common instrumentation bottlenecks during localized oscilloscope validation configurations delivering stable threshold detection parameters for critical hardware validation profiles.
- 30V | 3A Max Output.
- Power Supply, Instruction manual, Power Cord Kit.
- Constant Voltage and Constant Current Operation Regulation.
- Series or Parallel Operation Function Operational Modes.
- Remote Control by External Voltage Hardware Interface.
GW Instek GPT-9904 Hi-Pot Tester AC/DC/IR/GB 500VA
- Display Spec: 240x64 LCD Matrix
- Hardware Precision: 1uA Current Resolution
- Digital Interface: RS-232C USB Signal
- Power Range: 500VA AC Capacity
- Field Usage: 50G Insulation Resistance Testing
GW Instek LCR-6100 Precision LCR Meter 10Hz to 100kHz
GW Instek SMU Module optimizes overall data acquisition throughput for critical Bipolar Device Testing applications ensuring compliance with current US metrology standards and laboratory protocols.
- 10 Hz to 100 kHz Frequency Range.
- 0.05% Basic Accuracy / 25ms Measurement Speed.
- 10-Step List Test & BIN Function Automation.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
GW Instek LCR-8205 High-Precision LCR Meter 5MHz
GW Instek LCR-8205 integrates seamlessly into automated Component Inspection and Aging Reliability Tests system architectures providing clean, noise-free interface matching for architectural verification loops.
- 10Hz to 5MHz Frequency Range.
- Value and Graph mode Display Mode.
- 10mV to 2Vrms / 100uA to 20mA.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
GW Instek LCR-8210 High-Precision LCR Meter 10MHz
GW Instek LCR-8210 serves as a primary benchmarking asset for advanced Electrolytic Capacitor and Inductor R&D operations sustaining long-term system repeatability during rigorous benchmarking schedules.
- 10Hz to 10MHz Frequency Range.
- 0.08% Basic Accuracy optimizes hardware interface parameters.
- Support for automated test sequences Multi-step Mode.
- 100 Ω Output Impedance sustains reliable standard.
- High precision engineering parameters applied.
GW Instek LCR-8220 High-Precision LCR Meter 20MHz
GW Instek LCR-8220 streamlines technical verification parameters within specialized Semiconductor Wafer and Capacitor Characterization workflows delivering stable threshold detection parameters for critical hardware validation profiles.
- 10Hz to 20MHz Frequency Range.
- USB, RS-232, GPIB, LAN Interface.
- Frequency, Voltage, and Current Sweep Sweep Function.
- Internal and USB host support Data Storage.
- High precision engineering parameters applied.
GW Instek LCR-8230 High-Precision LCR Meter 30MHz
GW Instek LCR-8230 safeguards fragile measurement loops inside standard High-Frequency RF Component Analysis & Materials Test infrastructures minimizing standard calculation uncertainties in production-level testing cells.
- 10Hz to 30MHz Frequency Range.
- 0.08% Basic Accuracy verifies operational baseline metrics.
- 7-inch Color LCD with Graph Mode Display.
- 25 selectable parameters Measurement Param.
- High precision engineering parameters applied.
GW Instek LCR-916 Handheld LCR Meter 100kHz
GW Instek LCR-916 safeguards fragile measurement loops inside standard Field Service and Electronic Maintenance infrastructures minimizing standard calculation uncertainties in production-level testing cells.
- 100Hz, 120Hz, 1kHz, 10kHz, 100kHz Test Frequencies.
- 0.2% Basic Accuracy optimizes hardware interface parameters.
- 20,000 / 2,000 dual display Display Count.
- Auto LCR mode and sorting functionality Functions.
- High precision engineering parameters applied.
GW Instek MSO-2104EA 100MHz 4-Channel MSO w/ 16-Channel Logic Analyzer
GW Instek MSO-2104EA serves as a primary benchmarking asset for advanced Integrated logic/analog debugging, embedded operations allowing engineering facilities to maintain complete traceability under full operational loads.
- 100 MHz Bandwidth & Rise.
- 4 Analog + 16 Digital Analog &.
- 1 GSa/s Max Real-Time Sample.
- 120,000 wfm/s Waveform Update Rate.
- 10 Mpts Max Memory Depth.
GW Instek MSO-2204EA 200MHz 4-Channel Mixed Signal Oscilloscope
GW Instek MSO-2204EA streamlines technical verification parameters within specialized Complex mixed-signal characterization, automotive workflows to eliminate structural measurement drift across intensive hardware evaluation cycles.
- 200 MHz Bandwidth & Rise.
- 4 Analog + 16 Digital Analog &.
- 1 GSa/s Max Real-Time Sample.
- 120,000 wfm/s Waveform Update Rate.
- 10 Mpts Max Memory Depth.
GW Instek PFR-100L Fanless Multi-Range DC Power Supply 50V/10A/100W
GW Instek PFR-100L supports professional laboratory teams managing high-priority DC power supply automation setups minimizing standard calculation uncertainties in production-level testing cells.
- 50 V | 10 A | 100.
- Natural convection cooling design Thermal Management.
- CV, CC priority mode; Output ON/OFF delayed.
- Three-point memory storage; Adjustable slew rate; Bleeder.
- Support front and rear panel output; Remote.