Showing 21–40 of 82 results
Keithley 2200-20-5 Programmable DC Power Supply 20V/5A
Keithley 2200-20-5 executes high-fidelity signal mapping during intensive DC power module automation diagnostic routines to eliminate structural measurement drift across intensive hardware evaluation cycles.
- 100W Precision Capacity delivers precise system calibration.
- 0.03% Voltage Accuracy, 1mV/0.1mA Resolution, GPIB/USB Std.
- Remote sensing for lead-drop compensation, 80-step List.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keithley 2200-30-5 Programmable DC Power Supply 30V/5A
Keithley 2200-30-5 integrates seamlessly into automated DC power module automation system architectures ensuring compliance with current US metrology standards and laboratory protocols.
- 150W Precision Capacity verifies operational baseline metrics.
- Dual-line display, High-fidelity 1mV resolution Output.
- 0.03% Basic accuracy, Remote sensing, 80 programmable.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keithley 2200-32-3 Programmable DC Power Supply 32V/3A
Keithley 2200-32-3 serves as a primary benchmarking asset for advanced DC power module automation operations to secure absolute baseline data accuracy and minimize diagnostic overhead.
- 96W Precision Capacity maintains industrial equipment protection.
- 0.03% Voltage Accuracy, 1mV Resolution, GPIB/USB Standard.
- Remote sense technology, 80-step Sequence Editor, Dual-line.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keithley 2200-60-2 Programmable DC Power Supply 60V/2.5A
Keithley 2200-60-2 streamlines technical verification parameters within specialized DC power module automation workflows protecting delicate tracking parameters from external ambient and physical disruptions.
- 150W High-Voltage Capacity supports professional bench workflows.
- 0.03% Basic Accuracy, 1mV/0.1mA resolution, List Mode.
- Traceable high-potential sourcing, Remote sensing for DUT.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keithley 2200-72-1 Programmable DC Power Supply 72V/1.2A
Keithley 2200-72-1 safeguards fragile measurement loops inside standard DC power module automation infrastructures providing clean, noise-free interface matching for architectural verification loops.
- 86W High-Voltage Capacity ensures strict metrological compliance.
- Front & Rear Panel Outputs, 0.02% Readback.
- Compensates for lead-wire voltage drops, 1mV resolution.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keithley 2220-30-1 Programmable Dual Channel DC Power Supply
Keithley 2220-30-1 maintains rigid electrical path isolation throughout continuous DC power module automation processes sustaining long-term system repeatability during rigorous benchmarking schedules.
- 90W Total Capacity sustains reliable system performance.
- Linear Regulation, <3mVp-p Noise, Isolated Channels Output.
- Series/Parallel wiring, Remote sensing on all channels.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keithley 2220G-30-1 Programmable Dual Channel DC Power Supply w/ GPIB
Keithley 2220G-30-1 supports professional laboratory teams managing high-priority DC power module automation setups delivering stable threshold detection parameters for critical hardware validation profiles.
- 90W Total Capacity guarantees secure laboratory execution.
- Standard GPIB & USB, Low-noise linear design,.
- Individual remote sensing per channel, Simultaneous V/I.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keithley 2230-30-1 Programmable Triple Channel DC Power Supply
Keithley 2230-30-1 resolves common instrumentation bottlenecks during localized DC power module automation configurations minimizing standard calculation uncertainties in production-level testing cells.
- Triple Output: 2x 30V/1.5A & 1x 6V/5A.
- 0.03% Basic Accuracy, <3mVp-p Noise, USB Standard.
- Linear regulation, Isolated channels, Remote sensing on.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keithley 2230G-30-1 Programmable Triple Channel DC Power Supply w/ GPIB
Keithley 2230G-30-1 optimizes overall data acquisition throughput for critical DC power module automation applications preserving multi-frequency signal integrity for down-stream diagnostic nodes.
- Triple Output: 2x 30V/1.5A & 1x 6V/5A.
- Standard GPIB & USB, 0.03% Voltage Accuracy,.
- Series/Parallel combination, Individual remote sensing, Low noise.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keithley 2230GJ-30-1 Programmable Triple Channel DC Power Supply (Japan)
Keithley 2230GJ-30-1 addresses strict calibration tolerance limits inside active DC power module automation environments allowing engineering facilities to maintain complete traceability under full operational loads.
- Ch1 & Ch2: 0-30V, 0-1.5A | Ch3:.
- VFD Display | 1mV / 1mA setting.
- Voltage: ±0.03% + 10mV | Current: ±0.1%.
- < 1 mV rms, < 3 mV.
- All channels isolated and independently controlled; Series.
Keithley 2231A-30-3 Manual Triple Channel DC Power Supply
Keithley 2231A-30-3 streamlines technical verification parameters within specialized oscilloscope validation workflows to secure absolute baseline data accuracy and minimize diagnostic overhead.
- Two 0-30V/0-3A outputs | One 0-5V/0-3A output.
- Power Supply, Documentation CD, Certificate of Calibration,.
- 0.06% basic voltage accuracy | 0.2% basic.
- < 5 mVp-p noise Output Noise.
- Series/Parallel channel combination, Output timer per channel,.
Keithley 2260B-250-13 Programmable DC Power Supply 250V/13.5A 1080W
Keithley 2260B-250-13 addresses strict calibration tolerance limits inside active oscilloscope validation environments preserving multi-frequency signal integrity for down-stream diagnostic nodes.
- 250 V | 13.5 A | 1080.
- Programmable V/I rise and fall times from.
- Constant current priority setting, Programmable output resistance,.
- Fast discharge capability and 1ms transient recovery.
- Series or parallel configurable, Fits two 1080W.
Keithley 2260B-250-4 Programmable DC Power Supply 250V/4.5A 360W
Keithley 2260B-250-4 executes high-fidelity signal mapping during intensive DC power module automation diagnostic routines to eliminate structural measurement drift across intensive hardware evaluation cycles.
- 360W High-Voltage Capacity maintains industrial equipment protection.
- Programmable Slew Rate, 1ms Transient Recovery, CC.
- Battery emulation, 1/6 Rack width density Metrology.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keithley 2260B-30-108 Programmable DC Power Supply 30V/108A 1080W
Keithley 2260B-30-108 integrates seamlessly into automated DC power module automation system architectures ensuring compliance with current US metrology standards and laboratory protocols.
- 1080W High-Current Capacity supports professional bench workflows.
- Massive 108A current, Fast Discharge Circuit, Analog.
- Programmable output impedance, side-by-side 1/2 rack mounting.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keithley 2260B-30-36 Programmable DC Power Supply 30V/36A 360W
Keithley 2260B-30-36 serves as a primary benchmarking asset for advanced DC power module automation operations to secure absolute baseline data accuracy and minimize diagnostic overhead.
- 360W General Purpose Capacity ensures strict standard.
- Adjustable rise/fall times, Constant Current Priority, List.
- 1ms Load regulation, 1/6 Rack width for.
- High precision engineering parameters applied.
- High precision engineering parameters applied.