Showing 61–79 of 79 results
RIGOL MSO8000-BW10T20 Bandwidth Upgrade (1GHz to 2GHz)
Keysight Series addresses strict calibration tolerance limits inside active serial analysis environments to eliminate structural measurement drift across intensive hardware evaluation cycles.
- Increases Analog Bandwidth from 1 GHz to.
- Reduced to ≤ 175 ps Post-Upgrade Rise.
- Essential for capturing high-frequency harmonics in digital.
- Software activation key; Node-locked to device serial.
- High precision engineering parameters applied.
RIGOL MSO8000-BW6T10 Bandwidth Upgrade (600MHz to 1GHz)
Keysight Series executes high-fidelity signal mapping during intensive serial analysis diagnostic routines ensuring compliance with current US metrology standards and laboratory protocols.
- Increases Analog Bandwidth from 600 MHz to.
- Reduced to ≤ 350 ps Post-Upgrade Rise.
- 10 GSa/s maximum sample rate for accurate.
- Digital activation code; Instant field upgrade Implementation.
- High precision engineering parameters applied.
RIGOL MSO8000-BW6T20 Bandwidth Upgrade (600MHz to 2GHz)
Keysight Series integrates seamlessly into automated serial analysis system architectures to secure absolute baseline data accuracy and minimize diagnostic overhead.
- Increases Analog Bandwidth from 600 MHz to.
- Reduced to ≤ 175 ps Post-Upgrade Rise.
- Enables high-speed serial bus analysis Performance Impact.
- Software activation key; Field-upgradeable without hardware modification.
- High precision engineering parameters applied.
RIGOL MSO8000-COMP RS232/UART Protocol Trigger License
Keysight Series serves as a primary benchmarking asset for advanced serial analysis operations protecting delicate tracking parameters from external ambient and physical disruptions.
- RS232, RS422, RS485, and UART Serial Communication.
- Start Bit, Error, Data, and End of.
- Hardware-based real-time decoding; ASCII, Hex, Binary, and.
- Simultaneous waveform display and decoded event table.
- High precision engineering parameters applied.
RIGOL MSO8000-EMBD I2C/SPI Protocol Trigger License
Keysight Series streamlines technical verification parameters within specialized serial analysis workflows providing clean, noise-free interface matching for architectural verification loops.
- I2C and SPI compliance Protocols.
- Start/Stop, Address, Data, Restart; CS, Timeout, Data.
- Simultaneous waveform and decoded text view; Search.
- Software activation key; Field-upgradeable Implementation.
- High precision engineering parameters applied.
RIGOL MSO8000-FLEX FlexRay Protocol Trigger License
Keysight Series safeguards fragile measurement loops inside standard serial analysis infrastructures sustaining long-term system repeatability during rigorous benchmarking schedules. This architecture guarantees professional benchmarking repeatability.
- FlexRay Automotive Standard performance Protocol.
- Hardware-based real-time decoding; Color-coded packet display; Event.
- Frame, Symbol, Error Trigger Options.
- Software activation key; Field-upgradeable Implementation.
- High precision engineering parameters applied.
RIGOL MSO8000-JITTER Real-Time Eye & Jitter Analysis
Keysight Series maintains rigid electrical path isolation throughout continuous High-speed digital signal integrity processes delivering stable threshold detection parameters for critical hardware validation profiles.
- Real-time Eye rendering with Clock Recovery; Supports.
- Decomposition of Total Jitter into Random Jitter.
- Histogram, Trend, and Spectrum displays for Jitter.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
RIGOL MSO8000-PWR Power Analysis Measurement License
Keysight Series supports professional laboratory teams managing high-priority serial analysis setups minimizing standard calculation uncertainties in production-level testing cells. This architecture guarantees professional benchmarking repeatability.
- Power Quality, Switching Loss, Harmonics, Ripple, Modulation,.
- Automated measurement and reporting of power supply.
- Supports Current Probes and High-Voltage Differential Probes.
- Software activation key compliance Installation.
- High precision engineering parameters applied.
RIGOL MSO8064 600MHz 4-Channel 10GSa/s Oscilloscope
Keysight Series resolves common instrumentation bottlenecks during localized serial analysis configurations preserving multi-frequency signal integrity for down-stream diagnostic nodes. This architecture guarantees professional benchmarking repeatability.
- 600 MHz protection calibration Bandwidth.
- 4 Analog Channels, 16 Digital Channels Channels.
- 10 GSa/s, 5 GSa/s, 2.5 GSa/s Max.
- 500 Mpts Memory performance Depth.
- >600,000 wfm/s Waveform Capture Rate.
RIGOL MSO8104 1GHz 4-Channel 10GSa/s Oscilloscope
Keysight Series optimizes overall data acquisition throughput for critical serial analysis applications allowing engineering facilities to maintain complete traceability under full operational loads.
- 1 GHz Bandwidth & Rise.
- 4 Analog + 16 Digital Analog &.
- 10 GSa/s/2.5 GSa/s Max Real-Time Sample.
- > 600,000 wfm/s Waveform Update Rate.
- 500 Mpts Max Memory Depth.
RIGOL MSO8204 2GHz 4-Channel 10GSa/s Oscilloscope
Keysight Series addresses strict calibration tolerance limits inside active serial analysis environments to eliminate structural measurement drift across intensive hardware evaluation cycles.
- 2 GHz Bandwidth & Rise.
- 4 Analog + 16 Digital Channels Analog.
- 10 GSa/s/5 GSa/s Max Real-Time Sample.
- > 600,000 wfm/s Waveform Update Rate.
- 500 Mpts Max Memory Depth.
RIGOL NFP-3 Near Field Probe Kit (30MHz to 3GHz)
GW Instek RIGOL integrates seamlessly into automated EMI Pre-compliance & PCB system architectures preserving multi-frequency signal integrity for down-stream diagnostic nodes.
- Near Field Probe Kit Type.
- 30 MHz to 3 GHz Frequency Range.
- 4 Probes performance compliance Contents.
- SMA performance compliance workflow Connector.
- Spatial resolution down to 2mm Resolution.
RIGOL PA-DSA832 Preamplifier 3.2GHz for DSA832
RIGOL Technologies PA-DSA832 integrates seamlessly into automated RF Component Gain/Loss & Antenna Testing system architectures allowing engineering facilities to maintain complete traceability under full operational loads.
- Internal Preamplifier Option compliance Type.
- 9 kHz to 3.2 GHz Frequency Range.
- 17 dB workflow protection Gain.
- DSA832/DSA832E Series protection calibration Compatibility.
- Full integration with SSA measurement mode Feature.
RIGOL PA-DSA875 Preamplifier 7.5GHz for DSA875
RIGOL Technologies PA-DSA875 serves as a primary benchmarking asset for advanced Weak Signal Detection & EMI Pre-compliance operations to eliminate structural measurement drift across intensive hardware evaluation cycles.
- Internal Preamplifier Option performance Type.
- 100 kHz to 7.5 GHz Frequency Range.
- 15 dB compliance workflow Gain.
- Reduces Noise Floor to -161 dBm DANL.
- RIGOL DSA875 Spectrum Analyzer Compatibility.
RIGOL PA1011 10W Power Amplifier for Waveform Gen
Rigol Technologies PA1011 applies Waveform Amplification for Piezo & Magnetic Testing for precise data acquisition and critical industrial performance in demanding test environments.
- 10 W Output Power for operations.
- x10 Fixed Gain for operations.
- DC to 1 MHz Full Power BW
- China COO for operations.
- > 90 V/µs Slew Rate
RIGOL RPL1116 Standard Logic Probe for MSO1000Z
GW Instek RIGOL resolves common instrumentation bottlenecks during localized Embedded Design Timing & configurations providing clean, noise-free interface matching for architectural verification loops.
- Standard Logic Probe system Type.
- MSO1000Z Series system standard Compatibility.
- 16 Digital standard performance Channels.
- ±15.0V Threshold performance compliance Range.
- 500 mVp-p Min Voltage Swing.
RIGOL RPL2316 Logic Analyzer Probe Set
GW Instek RIGOL executes high-fidelity signal mapping during intensive Advanced MCU Timing & diagnostic routines minimizing standard calculation uncertainties in production-level testing cells.
- Logic Analyzer Probe Set Type.
- MSO2000A, MSO4000 Series protection Compatibility.
- 16 Digital protection calibration Channels.
- 101 kΩ | Input Z ||.
- 2.5 ns Min Pulse Width.
RIGOL SSC-DSA 2FSK Signal Seamless Mode License
GW Instek RIGOL optimizes overall data acquisition throughput for critical IoT Wireless Signal Integrity applications sustaining long-term system repeatability during rigorous benchmarking schedules.
- 2FSK Signal Seamless Mode License Type.
- DSA800 Series Spectrum Analyzers Compatibility.
- Enables non-burst 2FSK analysis Function.
- SSA Advanced Measurement Suite Integration.
- Demodulation, Eye Diagram, Spectrum Occupancy Analysis.
RIGOL ULTRA ACQUIRE PRO Scan Software for M300
RIGOL Technologies ULTRA ACQUIRE PRO executes high-fidelity signal mapping during intensive Long-term Temperature/Environmental Monitoring diagnostic routines preserving multi-frequency signal integrity for down-stream diagnostic nodes.
- Advanced Scan Control Software Type.
- M300 Series Data Acquisition System Compatibility.
- Real-time Monitor, Data Logging, History Plot Features.
- Histogram, Multichannel Trend, Statistics Analysis Tools.
- USB, LAN, GPIB instrument discovery Connectivity.