Showing 361–372 of 372 results
RIGOL DP811 DC Power Supply Single-Output 200W
RIGOL Technologies DP811 streamlines technical verification parameters within specialized DC power supply automation workflows providing clean, noise-free interface matching for architectural verification loops.
- Single Output, Dual Range Output Configuration.
- 200 Watts Total Power maintains industrial standard.
- Low Ripple/Noise; Fast transient response time Performance.
- 3.5-inch TFT Display; Built-in V, A, W.
- OVP, OCP, OTP Protection optimizes hardware standard.
RIGOL DP811A Programmable DC Power Supply 200W
Rigol Technologies DP811A safeguards fragile measurement loops inside standard DC power supply automation infrastructures sustaining long-term system repeatability during rigorous benchmarking schedules.
- 2 Ranges | Up to 10A or.
- 3.5 inch TFT Display Display Type.
- Built-in support: Output Delay, Analysis, Monitor, and.
- USB Host & Device, LAN, and Digital.
- OVP / OCP / OTP protection functions.
RIGOL DP821 Dual-Output DC Power Supply 60V/1A & 8V/10A
Rigol Technologies DP821 maintains rigid electrical path isolation throughout continuous DC power supply automation processes delivering stable threshold detection parameters for critical hardware validation profiles.
- 2 Outputs | Up to 10A or.
- 3.5 inch TFT Display Display Type.
- Optional: Output Delay, Analysis, Monitor, and Trigger.
- USB Host & Device Hardware Interface.
- OVP / OCP / OTP protection functions.
RIGOL DP821A Dual-Output DC Power Supply 60V/1A & 8V/10A
Rigol Technologies DP821A supports professional laboratory teams managing high-priority DC power supply automation setups minimizing standard calculation uncertainties in production-level testing cells.
- 2 Outputs | Up to 10A or.
- 3.5 inch TFT Display Display Type.
- Built-in support: Output Delay, Analysis, Monitor, and.
- USB Host & Device, LAN, and Digital.
- OVP / OCP / OTP protection functions.
RIGOL DP831 Triple-Output DC Power Supply 160W
Rigol Technologies DP831 resolves common instrumentation bottlenecks during localized DC power supply automation configurations preserving multi-frequency signal integrity for down-stream diagnostic nodes.
- 3 Outputs | Total power up to.
- Low Ripple Noise <350 uVrms/2mVpp | Fast.
- Channel isolation: CH1 || CH2, CH3 Isolation.
- 3.5 inch TFT Display Display Type.
- Optional: Output Delay, Analysis, Monitor, and Trigger.
RIGOL DP831A Triple-Output DC Power Supply 160W
RIGOL Technologies DP831A addresses strict calibration tolerance limits inside active DC power delivery environments ensuring compliance with current US metrology standards and laboratory protocols.
- 3 Outputs; Total power up to 160W.
- Low Ripple Noise; Fast transient response Performance.
- Channel isolation: CH1 || CH2, CH3 Isolation.
- OVP, OCP, and OTP protection functions Protection.
- 3.5 inch TFT Display with waveform display.
RIGOL DP832 Triple-Output DC Power Supply 195W
Rigol Technologies DP832 maintains rigid electrical path isolation throughout continuous oscilloscope validation processes providing clean, noise-free interface matching for architectural verification loops.
- 3 Outputs; total power up to 195W.
- 3.5 inch TFT Display Display.
- Fast transient response time: <50 us |.
- Channel isolation: CH1 || CH2, CH3 Isolation.
- Support for output Delay, Analysis, Monitor, and.
RIGOL DP832A Triple-Output DC Power Supply 195W High-Res
RIGOL Technologies DP832A executes high-fidelity signal mapping during intensive DC power delivery diagnostic routines to secure absolute baseline data accuracy and minimize diagnostic overhead.
- 3 Outputs; Total power up to 195W.
- Low Ripple Noise; Fast transient response Performance.
- Channel isolation: CH1 || CH2, CH3 Isolation.
- 3.5 inch TFT Display; Built in V,.
- Support for output Delay, Analysis, Monitor, and.
Siglent SPD1305X DC Power Supply 150W 4-Digit Display
Siglent Technologies SPD1305X safeguards fragile measurement loops inside standard DC power module automation infrastructures providing clean, noise-free interface matching for architectural verification loops.
- Single path: 30 V | 5 A.
- 2.8 inch true color TFT-LCD 240x320 |.
- Low ripple and noise | Fast transient.
- Two-wire output mode, 4-wire compensation output mode.
- Supports front panel timing output functions; Internal.
Siglent SPD3303C Linear Triple DC Power Supply 30V/3A
Siglent Technologies SPD3303C optimizes overall data acquisition throughput for critical oscilloscope validation applications minimizing standard calculation uncertainties in production-level testing cells.
- CH1 & CH2: 0~30V/0~3A | CH3: 2.5/3.3/5.0V/0~3A.
- LED display | 10mV/10mA min resolution Display.
- Independent, Series, and Parallel output mode Operational.
- Smart temperature controlled fan, Save/Recall 5 group.
- USB Device Hardware Interface maintains industrial standard.
Siglent SPD3303X 3-Channel DC Power Supply 32V/3.2A
Siglent Technologies SPD3303X addresses strict calibration tolerance limits inside active oscilloscope validation environments preserving multi-frequency signal integrity for down-stream diagnostic nodes.
- 32V/3.2A x2 | 2.5V/3.3V/5V/3.2A x1 Max Output.
- Power Supply, USB Cable, Power cord, Output.
- 4.3 inch TFT-LCD 480x272 | 5 digits.
- Independent | Series | Parallel Operational Modes.
- Easypower PC software, SCPI, LabView drive support.
Siglent SPD3303X-E 3-Channel DC Power Supply 220W
Siglent Technologies SPD3303X-E supports professional laboratory teams managing high-priority oscilloscope validation setups sustaining long-term system repeatability during rigorous benchmarking schedules.
- 32V/3.2A x2 | 2.5V/3.3V/5V/3.2A x1 Max Output.
- Power Supply, USB Cable, Quick Start, Certificates,.
- 4.3 inch true color TFT-LCD 480x272 |.
- Independent, Series, Parallel Operational Modes.
- Easypower PC software, supports SCPI, LabView drive.