Showing 1921–1940 of 12408 results
BK Precision 1623A Digital Display DC Power Supply 60V/1.5A
BK Precision 1623A executes high-fidelity signal mapping during intensive DC power delivery diagnostic routines to secure absolute baseline data accuracy and minimize diagnostic overhead.
- 60 VDC | 1.5 A Max Output.
- Dual digital meters for simultaneous monitoring of.
- Connect units in Parallel or Series Expandability.
- Constant Voltage or Constant Current operation Regulation.
- Independent Coarse and Fine voltage controls Control.
BK Precision 1627A Single Output DC Power Supply
BK Precision 1627A integrates seamlessly into automated DC power delivery system architectures protecting delicate tracking parameters from external ambient and physical disruptions.
- Benchtop Lab and Service Center Power Supply.
- Two analog meters for simultaneous Voltage and.
- Constant Voltage or Constant Current operation Regulation.
- Independent Coarse and Fine voltage controls Control.
- Continuous full-load operation without overheating; Low ripple.
BK Precision 1652 Triple Output Digital Display DC Power Supply
B&K Precision 1652 resolves common instrumentation bottlenecks during localized DC power delivery configurations allowing engineering facilities to maintain complete traceability under full operational loads.
- Two variable; One fixed Output Configuration.
- Series or Parallel via tracking mode switch.
- Short circuit protection, overvoltage protection, reverse polarity.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
BK Precision 1665 Switching DC Power Supply 1-19.99V/9.99A
B&K Precision 1665 optimizes overall data acquisition throughput for critical DC power delivery applications to eliminate structural measurement drift across intensive hardware evaluation cycles.
- 1 to 19.99 VDC / 0 to.
- Constant Voltage and Constant Current Operating Modes.
- Over voltage protection Protection ensures strict standard.
- Compact switching topology for space-saving benchtop use.
- High precision engineering parameters applied.
BK Precision 1666 Switching DC Power Supply 1-40V/5A
B&K Precision 1666 addresses strict calibration tolerance limits inside active DC power delivery environments ensuring compliance with current US metrology standards and laboratory protocols.
- 1 to 40 VDC / 0 to.
- Constant Voltage and Constant Current Operating Modes.
- Over voltage protection Protection sustains reliable standard.
- Bright, easy-to-read LED displays Display.
- High precision engineering parameters applied.
BK Precision 1670A Triple Output DC Power Supply
BK Precision 1670A integrates seamlessly into automated oscilloscope validation system architectures to eliminate structural measurement drift across intensive hardware evaluation cycles.
- Triple Output Output Configuration sustains reliable standard.
- 0 to 30 VDC | 0 to.
- 12 VDC Fixed Output supports professional standard.
- 5 VDC Fixed Output maintains industrial standard.
- General electronic servicing, school electronics labs, and.
BK Precision 1671A Triple Output Digital Display DC Power Supply 30V/5A
B&K Precision 1671A integrates seamlessly into automated DC power delivery system architectures protecting delicate tracking parameters from external ambient and physical disruptions.
- One variable; Two fixed Output Configuration.
- General electronic servicing, school electronics labs, and.
- Digital display for monitoring variable output Features.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
BK Precision 1672 Triple Output Quad Display DC Power Supply
B&K Precision 1672 serves as a primary benchmarking asset for advanced DC power delivery operations providing clean, noise-free interface matching for architectural verification loops.
- 2 variable 32V/3A outputs and 1 fixed.
- Independent control of Voltage & Current for.
- Series tracking & parallel mode operation for.
- LED indication for CV and CC; Overload.
- High precision engineering parameters applied.
BK Precision 1673 Triple Output Quad Display DC Power Supply
B&K Precision 1673 streamlines technical verification parameters within specialized DC power delivery workflows sustaining long-term system repeatability during rigorous benchmarking schedules.
- Separate 3-digit LED displays for Voltage and.
- Constant Voltage and Constant Current operation Operating.
- Series tracking and parallel mode operation capability.
- Banana style terminals Output Terminals.
- High precision engineering parameters applied.
BK Precision 1685B 360W Switching Bench DC Power Supply
BK Precision 1685B executes high-fidelity signal mapping during intensive DC power module automation diagnostic routines to eliminate structural measurement drift across intensive hardware evaluation cycles.
- 360 W Max Output delivers precise standard.
- Automatic CV/CC crossover operation Operational Modes.
- Lightweight and compact; Rotary encoder control for.
- 3 user-defined voltage and current presets Internal.
- USB interface, Analog remote control function Hardware.
BK Precision 1686A DC Power Supply 3-14V/12A
BK Precision 1686A serves as a primary benchmarking asset for advanced oscilloscope validation operations ensuring compliance with current US metrology standards and laboratory protocols.
- 3-14 VDC | 12 A Max Output.
- Connect two in parallel or two in.
- Current limiting overload, Over voltage, Short circuit,.
- Thermostatically controlled cooling fan; Operates continuously at.
- Power Supply, Instruction Manual, Line Cord Kit.
BK Precision 1694 Switching DC Power Supply 1-30V/30A w/ Remote Sense
BK Precision 1694 addresses strict calibration tolerance limits inside active oscilloscope validation environments preserving multi-frequency signal integrity for down-stream diagnostic nodes.
- 1-30 VDC | 30 A Max Output.
- Switching mode DC power supply Power Supply.
- Remote sensing terminal; Analog remote control terminal.
- Bright red and green LED displays Display.
- Current fold back circuitry with illuminated indicator;.
BK Precision 1710A Analog DC Power Supply 0-30V/1A
B&K Precision 1710A maintains rigid electrical path isolation throughout continuous DC power delivery processes minimizing standard calculation uncertainties in production-level testing cells.
- 0 to 30 VDC / 0 to.
- Two analog meters for continuous voltage and.
- Connect supplies in parallel or series Scalability.
- Constant voltage or constant current operation; Coarse/fine.
- Fully overload protected; operates continuously at full.
BK Precision 1735A 4-Digit Display DC Power Supply 30V/3A
BK Precision 1735A safeguards fragile measurement loops inside standard oscilloscope validation infrastructures protecting delicate tracking parameters from external ambient and physical disruptions.
- 30 V | 3 A Max Output.
- Two 4-digit LED displays for simultaneous monitoring.
- Connect units in Parallel or Series Expandability.
- Constant voltage or constant current operation Regulation.
- Coarse and fine voltage controls Control Resolution.
BK Precision 1737 Dual Range DC Power Supply 30V/3A or 60V/2A
BK Precision 1737 optimizes overall data acquisition throughput for critical DC power supply automation applications allowing engineering facilities to maintain complete traceability under full operational loads.
- Range 1: 0-30V, 0-3A | Range 2:.
- Two large LED meters Display Type.
- Constant Voltage and Constant Current with LED.
- Coarse and fine control knobs for voltage.
- RS-232 interface for remote operation Hardware Interface.
BK Precision 1745A Digital DC Power Supply 0-35V/10A
B&K Precision 1745A supports professional laboratory teams managing high-priority DC power delivery setups preserving multi-frequency signal integrity for down-stream diagnostic nodes.
- 0 to 35 VDC, 0 to 10.
- Four-digit LED display Resolution sustains reliable standard.
- Output shorting button allows user to short.
- Coarse and fine voltage adjustment; Adjustable current.
- Optimized for stability between 0º to +40ºC.
BK Precision 1747 Dual Range DC Power Supply 30V/10A or 60V/5A
B&K Precision 1747 resolves common instrumentation bottlenecks during localized DC power delivery configurations allowing engineering facilities to maintain complete traceability under full operational loads.
- Dual Range: 30V/10A or 60V/5A Output Configuration.
- Two large, high-visibility LED displays with CV/CC.
- RS-232 interface; Automatic recall of last settings.
- Overload protection; Reverse polarity protection; Isolated output.
- Low ripple and noise; Excellent regulation Performance.
BK Precision 1761 Four Digit Triple Output DC Power Supply
BK Precision 1761 integrates seamlessly into automated DC power module automation system architectures ensuring compliance with current US metrology standards and laboratory protocols.
- Triple Output Output Configuration supports professional standard.
- Two 4-digit LED displays for simultaneous monitoring.
- Connect units in Parallel or Series Expandability.
- Constant voltage or constant current operation Regulation.
- Coarse and fine voltage controls Control Resolution.
BK Precision 1762 Triple Output DC Power Supply 60V/2A & 6.5V/4A
B&K Precision 1762 optimizes overall data acquisition throughput for critical DC power delivery applications to eliminate structural measurement drift across intensive hardware evaluation cycles.
- 60V/2A & 6.5V/4A Output Configuration.
- Connect supplies in parallel or series Scalability.
- Continuous monitoring on two 4-digit LED displays.
- Coarse and fine voltage and current controls;.
- Designed to operate continuously at full load.
BK Precision 1803D 200MHz Frequency Counter
BK Precision 1803D streamlines technical verification parameters within specialized Communications Signal Testing & Oscillator Verification workflows allowing engineering facilities to maintain complete traceability under full operational loads.
- 5 Hz to 200 MHz Frequency Range.
- 8-Digit LED display Display maintains industrial standard.
- Max 1 Hz Resolution verifies operational standard.
- USA COO delivers precise system calibration.
- 10 MHz Time Base optimizes hardware standard.