Showing 481–500 of 785 results
Keysight N6761A Precision DC Power Module 50V 1.5A 50W
Keysight N6761A safeguards fragile measurement loops inside standard Semiconductor Characterization and Nano-device Test infrastructures minimizing standard calculation uncertainties in production-level testing cells.
- 50 V / 1.5 A / 50.
- nA-level measurement resolution Measurement Range.
- 0.016% + 6 mV Voltage Accy.
- < 2 mVrms Output Noise.
- High precision engineering parameters applied.
Keysight N6763A Precision DC Power Module 20V 50A 300W
Keysight N6763A maintains rigid electrical path isolation throughout continuous Leakage Current Analysis in Mobile Components processes preserving multi-frequency signal integrity for down-stream diagnostic nodes.
- 20 V / 50 A / 300.
- 1 µA resolution in low-measurement range Low.
- Programmable Voltage and Current slew rates Slew.
- 0°C to 55°C Operating Temp.
- High precision engineering parameters applied.
Keysight N6763A-760 Output Disconnect & Polarity Relays
Keysight Technologies N6763A-760 serves as a primary benchmarking asset for advanced Automated Battery Cycle Testing & Analysis operations preserving multi-frequency signal integrity for down-stream diagnostic nodes.
- Output Disconnect & Polarity Relays Type.
- N6763A Precision Module Compatibility verifies operational standard.
- 20V / 50A Voltage/Current delivers precise standard.
- 4-pole mechanical configuration Relay Setup.
- Independent control of disconnect and polarity Control.
Keysight N6763A-761 Output Disconnect Relays
Keysight Technologies N6763A-761 streamlines technical verification parameters within specialized Mobile Power Management IC Precision Test workflows allowing engineering facilities to maintain complete traceability under full operational loads.
- Output Disconnect Relays Type supports professional standard.
- N6763A Compatibility maintains industrial equipment protection.
- 50 A Current Level verifies operational standard.
- Minimum impedance mechanical connection Relay Path.
- Firmware A.04.00 or higher required System Support.
Keysight N6764A Precision DC Power Module 60V 20A 300W
Keysight N6764A supports professional laboratory teams managing high-priority Automated Test Equipment Precision Integration setups allowing engineering facilities to maintain complete traceability under full operational loads.
- 60 V / 20 A / 300.
- Simultaneous Voltage and Current Digitizing Measurement Type.
- < 4.5 mVrms Ripple & Noise.
- < 1 ms processing latency Command Speed.
- High precision engineering parameters applied.
Keysight N6764A-760 Output Disconnect & Polarity Relays
Keysight Technologies N6764A-760 safeguards fragile measurement loops inside standard Precision Automated Characterization of DC-DC Converters infrastructures to eliminate structural measurement drift across intensive hardware evaluation cycles.
- Output Disconnect & Polarity Relays Type.
- N6764A Precision Module Compatibility supports professional standard.
- 60V / 20A Operating Range.
- Internal cross-bar switching Polarity Logic.
- Hardware interlock against relay arcing Safety.
Keysight N6764A-761 Output Disconnect Relays
Keysight Technologies N6764A-761 maintains rigid electrical path isolation throughout continuous Leakage Current Measurement Protection processes ensuring compliance with current US metrology standards and laboratory protocols.
- Output Disconnect Relays Type sustains reliable standard.
- N6764A Compatibility ensures strict metrological compliance.
- Dual-line disconnect Configuration supports professional bench workflows.
- > 100,000 cycles at full load Switch.
- Optimized for low heat generation in precision.
Keysight N6765A Precision DC Power Module 20V 50A 500W
Keysight N6765A resolves common instrumentation bottlenecks during localized Battery Characterization and High-Current Precision R&D configurations to eliminate structural measurement drift across intensive hardware evaluation cycles.
- 20 V / 50 A / 500.
- 0.04% + 15 mA Current Accuracy.
- 0.016% + 5 mV Voltage Accuracy.
- < 100 µs Response Time.
- High precision engineering parameters applied.
Keysight N6765A-760 Output Disconnect & Polarity Relays
Keysight Technologies N6765A-760 supports professional laboratory teams managing high-priority Precision Plating & Semiconductor Dynamic Test setups to secure absolute baseline data accuracy and minimize diagnostic overhead.
- Output Disconnect & Polarity Relays Type.
- N6765A Precision Module Compatibility sustains reliable standard.
- 50 A Current Capacity ensures strict standard.
- 20 V Voltage Limit supports professional standard.
- Internal polarity flip for high-current loads Features.
Keysight N6765A-761 Output Disconnect Relays
Keysight Technologies N6765A-761 resolves common instrumentation bottlenecks during localized High-current Precision Load Protection configurations protecting delicate tracking parameters from external ambient and physical disruptions.
- Output Disconnect Relays Type optimizes hardware standard.
- N6765A Compatibility guarantees secure laboratory execution.
- Heavy-duty 50A mechanical contacts Relay Rating.
- Up to 240 Vdc Isolation Voltage.
- < 30 ms Disconnect Latency.
Keysight N6766A Precision DC Power Module 60V 17A 500W
Keysight N6766A optimizes overall data acquisition throughput for critical High-Power PMIC and Automotive Electronic Testing applications ensuring compliance with current US metrology standards and laboratory protocols.
- 60 V / 17 A / 500.
- 18-bit Digitizer Measurement Res optimizes hardware standard.
- uA and nA measurements for sleep mode.
- Load Regulation: 0.01% + 2 mV Stability.
- High precision engineering parameters applied.
Keysight N6766A-760 Output Disconnect & Polarity Relays
Keysight Technologies N6766A-760 optimizes overall data acquisition throughput for critical High-precision Bi-directional Battery Simulation applications providing clean, noise-free interface matching for architectural verification loops.
- Output Disconnect & Polarity Relays Type.
- N6766A Precision Module Compatibility optimizes hardware standard.
- 60V / 17A Max Voltage/Current.
- Automated polarity switching + safety disconnect Function.
- Integrated with N6705C DC Power Analyzer Control.
Keysight N6766A-761 Output Disconnect Relays
Keysight Technologies N6766A-761 addresses strict calibration tolerance limits inside active Precision ATE Measurement Isolation environments sustaining long-term system repeatability during rigorous benchmarking schedules.
- Output Disconnect Relays Type verifies operational standard.
- N6766A Precision Module Compatibility delivers precise standard.
- < 10 mOhm Contact Resistance.
- High-current mechanical disconnect Relay Type.
- Designed to maintain uA measurement accuracy Precision.
Keysight N6773A DC Power Module 20V/15A 300W
Keysight N6773A optimizes overall data acquisition throughput for critical oscilloscope validation applications minimizing standard calculation uncertainties in production-level testing cells.
- 20 V | 15 A | 300.
- Voltage: 0.1% + 20 mV | Current:.
- CV peak-to-peak: 20 mV | CV rms:.
- Voltage: 13 mV | Current: 6 mA.
- Plug-in Module for N6700 Series Modular Power.
Keysight N6773A-760 Output Disconnect & Polarity Relays
Keysight Technologies N6773A-760 executes high-fidelity signal mapping during intensive High-current Bi-directional Power Simulation diagnostic routines delivering stable threshold detection parameters for critical hardware validation profiles.
- Output Disconnect & Polarity Relays Type.
- Keysight N6773A Compatibility verifies operational baseline metrics.
- 15 A Max Current delivers precise standard.
- Physical break in both output lines Disconnect.
- Cross-connection of output rails Polarity Type.
Keysight N6774A DC Power Module 35V/9A 300W
Keysight N6774A executes high-fidelity signal mapping during intensive oscilloscope validation diagnostic routines allowing engineering facilities to maintain complete traceability under full operational loads.
- 35 V | 8.5 A | 300.
- Voltage: 0.1% + 35 mV | Current:.
- CV peak-to-peak: 22 mV | CV rms:.
- Voltage: 16 mV | Current: 6 mA.
- Plug-in Module for N6700 Series Modular Power.
Keysight N6774A-760 Polarity Reversal Relays
Keysight Technologies N6774A-760 integrates seamlessly into automated Magnetic Component & Motor Direction Testing system architectures minimizing standard calculation uncertainties in production-level testing cells.
- Polarity Reversal Relays Type supports professional standard.
- Keysight N6774A Compatibility maintains industrial equipment protection.
- Programmable Voltage Polarity Flip Function.
- Full 8.5 A Rated Current Current Support.
- Internal long-cycle life mechanical relays Reliability.
Keysight N6775A DC Power Module 60V/5A 300W
Keysight N6775A addresses strict calibration tolerance limits inside active oscilloscope validation environments preserving multi-frequency signal integrity for down-stream diagnostic nodes.
- 60 V | 5 A | 300.
- Voltage: 0.1% + 60 mV | Current:.
- CV peak-to-peak: 35 mV | CV rms:.
- Voltage: 24 mV | Current: 6 mA.
- Plug-in Module for N6700 Series Modular Power.
Keysight N6775A-761 Output Disconnect Relays
Keysight Technologies N6775A-761 serves as a primary benchmarking asset for advanced Galvanic Isolation in Multi-channel Test Racks operations preserving multi-frequency signal integrity for down-stream diagnostic nodes.
- Output Disconnect Relays Type ensures strict standard.
- Keysight N6775A Compatibility supports professional bench workflows.
- Open-circuit mechanical relay Isolation maintains industrial standard.
- 5 A Current Rating verifies operational standard.
- Software controlled state via SCPI Features.
Keysight N6776A DC Power Module 100V 3A 300W N6700
Keysight N6776A addresses strict calibration tolerance limits inside active Production Test for Power Electronics environments to secure absolute baseline data accuracy and minimize diagnostic overhead.
- 100 V / 3 A / 300.
- > 80% at Full Load Efficiency.
- 0.1% + 100 mV Programming Accy.
- High precision engineering parameters applied.
- High precision engineering parameters applied.