Showing 501–520 of 785 results
Keysight N6777A DC Power Module 150V 2A 300W N6700
Keysight N6777A executes high-fidelity signal mapping during intensive Precision High-Voltage DC ATE Systems diagnostic routines protecting delicate tracking parameters from external ambient and physical disruptions.
- 150 V / 2 A / 300.
- High-Performance Line/Load Regulation Regulation verifies operational standard.
- OVP, OCP, OPP, OTP Protection.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keysight N6777A-054 High-Speed Test Extensions
Keysight Technologies N6777A-054 streamlines technical verification parameters within specialized Transient Analysis & Precise Current Profiling workflows allowing engineering facilities to maintain complete traceability under full operational loads.
- High-Speed Test Extensions Type sustains reliable standard.
- N6777A DC Power Module Compatibility.
- Digitizer, Data Logging, & List Mode Features.
- 50 kHz Sampling Rate maintains industrial standard.
- 512k points per measurement Data Depth.
Keysight N6777A-760 Output Disconnect & Polarity Relays
Keysight Technologies N6777A-760 safeguards fragile measurement loops inside standard Automated Bi-directional Device Testing infrastructures to eliminate structural measurement drift across intensive hardware evaluation cycles.
- Output Disconnect & Polarity Reversal Relays Type.
- Keysight N6777A Module Compatibility sustains reliable standard.
- Switches + and - terminals + Disconnect.
- Typically < 20 ms Relay Speed.
- 150 V Max Voltage maintains industrial standard.
Keysight N6777A-761 Output Disconnect Relays
Keysight Technologies N6777A-761 maintains rigid electrical path isolation throughout continuous Sensitive Component Protection & Safety Isolation processes ensuring compliance with current US metrology standards and laboratory protocols.
- Output Disconnect Relays Type optimizes hardware standard.
- Keysight N6777A Power Module Compatibility.
- Mechanical Relay Type sustains reliable system performance.
- Physical galvanic isolation of output terminals Function.
- Prevents back-EMF and leakage during idle Safety.
Keysight N6781A SMU for Battery Drain Analysis
Keysight N6781A integrates seamlessly into automated IoT Battery Life Analysis & Current Leakage system architectures providing clean, noise-free interface matching for architectural verification loops.
- 2-Quadrant SMU for Battery Drain Analysis Type.
- nA to Amps Measurement maintains industrial standard.
- 200 kHz Digitizer Rate verifies operational standard.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keysight N6781A-UK6 Calibration Certificate with Test Data
Keysight Technologies N6781A-UK6 applies Aerospace & Medical Device Test Metrology for precise data acquisition and critical industrial performance in demanding test environments.
- Calibration Certificate with Measurement Report Service Type
- Keysight N6781A SMU Compatibility for operations.
- NIST Traceable Compliance for operations.
- USA COO for operations.
- Voltage and Current measurement verification Validation
Keysight N6782A SMU for Functional Test 2-Quadrant
Keysight N6782A serves as a primary benchmarking asset for advanced Functional Test of Mobile PMIC & ICs operations sustaining long-term system repeatability during rigorous benchmarking schedules.
- 2-Quadrant Source Measure Unit Type.
- ± 20 V / ± 3 A.
- Seamless Dynamic Ranging Feature maintains industrial standard.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keysight N6784A 4-Quadrant General Purpose SMU
Keysight N6784A streamlines technical verification parameters within specialized Bipolar Device Testing, Precision Analog Circuits, Aerospace Metrology workflows delivering stable threshold detection parameters for critical hardware validation profiles.
- 20W / ±20V / ±3A Capacity.
- Bi-directional Source & Sink, 100 kHz High-speed.
- 0.025% + 1.2mV Precision, 8 nA Current.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keysight N6785A SMU for Battery Drain Analysis
Keysight Technologies N6785A safeguards fragile measurement loops inside standard DC power supply automation infrastructures sustaining long-term system repeatability during rigorous benchmarking schedules.
- 80 Watts Power Output maintains industrial standard.
- 20V / ±8A Voltage / Current.
- Designed specifically for mobile device battery life/drain.
- High precision current measurement from nA to.
- Mainframe integrated protection and LXI connectivity Safety/Protection.
Keysight N6785A-UK6 Calibration Certificate with Test Data
Keysight Technologies N6785A-UK6 applies Quality Assurance & ISO 9001 Compliance for precise data acquisition and critical industrial performance in demanding test environments.
- Calibration Certificate with As-Found/As-Left Data Service Type
- Keysight N6785A Source Measure Unit Compatibility
- Commercial Calibration compliant Standard for operations.
- USA COO for operations.
- Full performance test data report Included
Keysight N6786A Functional Test SMU Multiple Range
Keysight Technologies N6786A maintains rigid electrical path isolation throughout continuous DC power supply automation processes delivering stable threshold detection parameters for critical hardware validation profiles.
- 80 Watts Power Output supports professional standard.
- 20 V / 15 V / 10.
- ±4 A / ±5 A / ±6.7.
- Voltage: 0.025% + 1.8 mV; Current: 0.04%.
- nA-level resolution current measurement Measurement.
Keysight N6791A 100W DC Electronic Load Module
Keysight SMU Module resolves common instrumentation bottlenecks during localized Bipolar Device Testing configurations to eliminate structural measurement drift across intensive hardware evaluation cycles.
- Requires Keysight N6700 Series Mainframe System Compatibility.
- CV, CC, CR, CP Operating Modes.
- Arbitrary Waveform Emulation & High-Speed Data Logging.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keysight N6792A 200W DC Electronic Load Module
Keysight SMU Module optimizes overall data acquisition throughput for critical Bipolar Device Testing applications ensuring compliance with current US metrology standards and laboratory protocols.
- Requires Keysight N6700 Series Mainframe System Compatibility.
- 60V / 40A / 200W High-Density Sinking.
- Absolute Traceability with Integrated Data Logger Metrological.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keysight N7550A 2-Port ECal Module DC to 4GHz
Keysight Technologies N7550A supports professional laboratory teams managing high-priority DC power supply automation setups minimizing standard calculation uncertainties in production-level testing cells.
- DC to 4 GHz Frequency Range.
- 2-Port Electronic Calibration Module Port Configuration.
- Supports Type N and 3.5 mm connectors.
- USB 2.0 micro-interface Hardware Interface.
- Smaller, lighter footprint; Zero wait time for.
Keysight N7551A 2-Port ECal Module DC to 6.5GHz
Keysight Technologies EA-PS Series resolves common instrumentation bottlenecks during localized DC power supply automation configurations preserving multi-frequency signal integrity for down-stream diagnostic nodes.
- DC to 6.5 GHz Electronic Calibration Capacity.
- Zero wait time technology, Type N and.
- Traceable to mechanical kit-grade precision, One-button ECal.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keysight N7552A 2-Port ECal Module DC to 9GHz
Keysight Technologies EA-PS Series optimizes overall data acquisition throughput for critical DC power supply automation applications allowing engineering facilities to maintain complete traceability under full operational loads.
- DC to 9 GHz Electronic Calibration Capacity.
- Zero wait time technology, Type N and.
- High-fidelity RF reference, eliminates manual operator error.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keysight N7554A 2-Port ECal Module DC to 18GHz
Keysight Technologies N7554A addresses strict calibration tolerance limits inside active DC power supply automation environments to eliminate structural measurement drift across intensive hardware evaluation cycles.
- DC to 18 GHz Frequency Range.
- 2-Port Electronic Calibration Module Port Configuration.
- Supports Type N and 3.5 mm connectors.
- Smaller, lighter footprint; Zero wait time for.
- the convenience of ECal with the performance.
Keysight N8482A 100kHz-6GHz Average Power Sensor
GW Instek Keysight serves as a primary benchmarking asset for advanced General Purpose CW & operations allowing engineering facilities to maintain complete traceability under full operational loads.
- Average Power Sensor workflow Type.
- 100 kHz to 6 GHz Freq Range.
- -35 dBm to +20 dBm Power Range.
- < 1% calibration system Linearity.
- Type-N calibration system standard Connector.
Keysight N8731A DC Power Supply 8V/400A 3200W (GPIB/LAN)
Keysight Technologies N8731A supports professional laboratory teams managing high-priority DC power delivery setups preserving multi-frequency signal integrity for down-stream diagnostic nodes.
- 3200 Watts Power Output ensures strict standard.
- 0-8 V / 0-400 A Voltage /.
- Voltage: 0.05% + 4mV / Current: 0.1%.
- CV p-p: 60mV / CV rms: 8mV.
- GPIB and LAN interfaces included Connectivity.