Showing 1–20 of 79 results
RIGOL DL3021 200W Electronic Load 150V 40A 15kHz
Rigol Technologies DL3021 optimizes overall data acquisition throughput for critical Power Supply Stress Test & Battery Discharge Analysis applications ensuring compliance with current US metrology standards and laboratory protocols.
- 200 W Max Power delivers precise standard.
- 150 V / 40 A Voltage/Current.
- 15 kHz Transient Freq guarantees secure standard.
- 0.001 A/μs to 2.5 A/μs Slew Rate.
- High precision engineering parameters applied.
RIGOL DL3021A 200W High Resolution Electronic Load
Rigol Technologies DL3021A addresses strict calibration tolerance limits inside active Power Supply Stress Testing and Battery Discharge Analysis environments to secure absolute baseline data accuracy and minimize diagnostic overhead.
- 200 W Max Power verifies operational standard.
- 150 V / 40 A Voltage/Current.
- Up to 30 kHz Frequency.
- 0.001 A/us to 3.2 A/us Slew Rate.
- High precision engineering parameters applied.
RIGOL DL3031 350W Electronic Load 150V 60A 15kHz
Rigol Technologies DL3031 supports professional laboratory teams managing high-priority High-Performance Power Supply Transient Testing setups allowing engineering facilities to maintain complete traceability under full operational loads.
- 350 W Max Power ensures strict standard.
- 150 V / 60 A Voltage/Current.
- 30 kHz Transient Freq maintains industrial standard.
- Up to 5 A/μs Slew Rate.
- High precision engineering parameters applied.
RIGOL DP711 Programmable Linear DC Power Supply 30V/5A
Rigol Technologies DP711 safeguards fragile measurement loops inside standard DC power supply automation infrastructures sustaining long-term system repeatability during rigorous benchmarking schedules.
- Single output | 30 V | 5.
- 3.5-inch TFT-LCD | 1 mV/1 mA resolution.
- Low ripple and noise; Excellent load and.
- External trigger function; Timing output Advanced Functions.
- RS232 interface communication supported Hardware Interface.
RIGOL DP712 Programmable Linear DC Power Supply 50V/3A
Rigol Technologies DP712 addresses strict calibration tolerance limits inside active DC power module automation environments allowing engineering facilities to maintain complete traceability under full operational loads.
- Single output | 50 V | 3.
- 3.5-inch TFT-LCD | 1 mV/1 mA resolution.
- External trigger function; Timing output Advanced Functions.
- RS232 interface communication supported Hardware Interface.
- OVP/OCP/OTP protection; Front panel locking Safety Mechanism.
RIGOL DP811 DC Power Supply Single-Output 200W
RIGOL Technologies DP811 streamlines technical verification parameters within specialized DC power supply automation workflows providing clean, noise-free interface matching for architectural verification loops.
- Single Output, Dual Range Output Configuration.
- 200 Watts Total Power maintains industrial standard.
- Low Ripple/Noise; Fast transient response time Performance.
- 3.5-inch TFT Display; Built-in V, A, W.
- OVP, OCP, OTP Protection optimizes hardware standard.
RIGOL DP811A Programmable DC Power Supply 200W
Rigol Technologies DP811A safeguards fragile measurement loops inside standard DC power supply automation infrastructures sustaining long-term system repeatability during rigorous benchmarking schedules.
- 2 Ranges | Up to 10A or.
- 3.5 inch TFT Display Display Type.
- Built-in support: Output Delay, Analysis, Monitor, and.
- USB Host & Device, LAN, and Digital.
- OVP / OCP / OTP protection functions.
RIGOL DP821 Dual-Output DC Power Supply 60V/1A & 8V/10A
Rigol Technologies DP821 maintains rigid electrical path isolation throughout continuous DC power supply automation processes delivering stable threshold detection parameters for critical hardware validation profiles.
- 2 Outputs | Up to 10A or.
- 3.5 inch TFT Display Display Type.
- Optional: Output Delay, Analysis, Monitor, and Trigger.
- USB Host & Device Hardware Interface.
- OVP / OCP / OTP protection functions.
RIGOL DP821A Dual-Output DC Power Supply 60V/1A & 8V/10A
Rigol Technologies DP821A supports professional laboratory teams managing high-priority DC power supply automation setups minimizing standard calculation uncertainties in production-level testing cells.
- 2 Outputs | Up to 10A or.
- 3.5 inch TFT Display Display Type.
- Built-in support: Output Delay, Analysis, Monitor, and.
- USB Host & Device, LAN, and Digital.
- OVP / OCP / OTP protection functions.
RIGOL DP831 Triple-Output DC Power Supply 160W
Rigol Technologies DP831 resolves common instrumentation bottlenecks during localized DC power supply automation configurations preserving multi-frequency signal integrity for down-stream diagnostic nodes.
- 3 Outputs | Total power up to.
- Low Ripple Noise <350 uVrms/2mVpp | Fast.
- Channel isolation: CH1 || CH2, CH3 Isolation.
- 3.5 inch TFT Display Display Type.
- Optional: Output Delay, Analysis, Monitor, and Trigger.
RIGOL DP831A Triple-Output DC Power Supply 160W
RIGOL Technologies DP831A addresses strict calibration tolerance limits inside active DC power delivery environments ensuring compliance with current US metrology standards and laboratory protocols.
- 3 Outputs; Total power up to 160W.
- Low Ripple Noise; Fast transient response Performance.
- Channel isolation: CH1 || CH2, CH3 Isolation.
- OVP, OCP, and OTP protection functions Protection.
- 3.5 inch TFT Display with waveform display.
RIGOL DP832 Triple-Output DC Power Supply 195W
Rigol Technologies DP832 maintains rigid electrical path isolation throughout continuous oscilloscope validation processes providing clean, noise-free interface matching for architectural verification loops.
- 3 Outputs; total power up to 195W.
- 3.5 inch TFT Display Display.
- Fast transient response time: <50 us |.
- Channel isolation: CH1 || CH2, CH3 Isolation.
- Support for output Delay, Analysis, Monitor, and.
RIGOL DP832A Triple-Output DC Power Supply 195W High-Res
RIGOL Technologies DP832A executes high-fidelity signal mapping during intensive DC power delivery diagnostic routines to secure absolute baseline data accuracy and minimize diagnostic overhead.
- 3 Outputs; Total power up to 195W.
- Low Ripple Noise; Fast transient response Performance.
- Channel isolation: CH1 || CH2, CH3 Isolation.
- 3.5 inch TFT Display; Built in V,.
- Support for output Delay, Analysis, Monitor, and.
RIGOL DS1052E 50MHz 2-Channel Digital Oscilloscope
RIGOL Technologies DS1052E optimizes overall data acquisition throughput for critical Standard Bench Testing & Legacy Maintenance applications delivering stable threshold detection parameters for critical hardware validation profiles.
- 50 MHz standard performance Bandwidth.
- 2 Channels Analog compliance Channels.
- 1 GSa/s Sample workflow Rate.
- 7 ns Rise protection Time.
- 1 Mpts Memory calibration Depth.
RIGOL DS1054Z 50MHz 4-Channel Digital Oscilloscope
RIGOL Technologies DS1054Z addresses strict calibration tolerance limits inside active Best-in-class Entry Level Engineering & Academic Labs environments minimizing standard calculation uncertainties in production-level testing cells.
- 50 MHz system standard Bandwidth.
- 4 Channels Analog performance Channels.
- 1 GSa/s Sample compliance Rate.
- 12 Mpts/24 Mpts Memory Depth.
- 30,000 wfms/s Waveform protection Rate.
RIGOL DS1074Z PLUS 70MHz 4-Channel 1GSa/s Oscilloscope
GW Instek RIGOL resolves common instrumentation bottlenecks during localized Hobbyist Bench & Entry-Level configurations providing clean, noise-free interface matching for architectural verification loops.
- 70 MHz protection calibration Bandwidth.
- 4 Analog calibration system Channels.
- 1 GSa/s Sample standard Rate.
- 24 Mpts Memory performance Depth.
- 8-bit Vertical performance compliance Res.