Showing 61–80 of 372 results
BK Precision XLN30052-GL Programmable DC Power Supply 300V/5.2A w/ GPIB/LAN
B&K Precision XLN30052-GL addresses strict calibration tolerance limits inside active DC power delivery environments ensuring compliance with current US metrology standards and laboratory protocols.
- 0 to 300 V / 0 to.
- LXI compliant LAN, GPIB, USB, and RS485.
- External analog programming interface for integration Configuration.
- Master/Slave mode support for expanding total system.
- 1U high, 19-inch wide high-density chassis Form.
BK Precision XLN3640 Programmable DC Power Supply 36V/40A 1.44kW
B&K Precision XLN3640 executes high-fidelity signal mapping during intensive DC power delivery diagnostic routines to secure absolute baseline data accuracy and minimize diagnostic overhead.
- 1440 Watts Power Output ensures strict standard.
- USB and RS485 Interface Standard I/O.
- High stability and low noise for critical.
- remote control application software Software.
- 5 V / 1 A fixed output.
BK Precision XLN3640-GL DC Power Supply 36V/40A w/ GPIB/LAN
B&K Precision XLN3640-GL integrates seamlessly into automated DC power delivery system architectures protecting delicate tracking parameters from external ambient and physical disruptions.
- 0 to 36 V / 0 to.
- Full suite: GPIB, LAN, USB, and RS485.
- Less than 50 ms average command processing.
- 5 V / 1 A fixed output.
- Full keypad and rotary knob for intuitive.
BK Precision XLN60026 Programmable DC Power Supply 600V/2.6A w/ GPIB/LAN
B&K Precision XLN60026 serves as a primary benchmarking asset for advanced DC power delivery operations providing clean, noise-free interface matching for architectural verification loops.
- 1560 Watts Power Output guarantees secure standard.
- USB and RS485 interfaces Standard Interfaces.
- Constant Voltage and Constant Current Operating Modes.
- Series/Parallel master-slave config for up to 4.
- Synchronize up to 31 units from one.
BK Precision XLN60026-GL Programmable DC Power Supply 600V/2.6A 1.56kW w/ GPIB/LAN
B&K Precision XLN60026-GL streamlines technical verification parameters within specialized DC power delivery workflows sustaining long-term system repeatability during rigorous benchmarking schedules.
- 0 to 600 V / 0 to.
- 1U high-density package for high-voltage ATE applications.
- USB, RS485, GPIB, and LAN included Full.
- Programmable voltage and current slew rate for.
- LabVIEW drivers available; SCPI command support System.
BK Precision XLN6024 Programmable DC Power Supply 60V/24A 1.44kW
B&K Precision XLN6024 safeguards fragile measurement loops inside standard DC power delivery infrastructures delivering stable threshold detection parameters for critical hardware validation profiles.
- 1440 Watts Power Output delivers precise standard.
- Compact 1U density; Switching topology with high.
- USB and RS485 Interface; Master/Slave parallel or.
- Application software for remote control and data.
- 5 V / 1 A fixed output.
BK Precision XLN6024-GL DC Power Supply 60V/24A w/ GPIB/LAN
B&K Precision XLN6024-GL maintains rigid electrical path isolation throughout continuous DC power delivery processes minimizing standard calculation uncertainties in production-level testing cells.
- 1440 Watts Power Output verifies operational standard.
- 0-60 V / 0-24 A Voltage /.
- GPIB, LAN, USB, and RS485 interfaces standard.
- Synchronized control up to 31 power supplies.
- High precision engineering parameters applied.
BK Precision XLN8018 DC Power Supply 80V/18A
B&K Precision XLN8018 supports professional laboratory teams managing high-priority DC power delivery setups preserving multi-frequency signal integrity for down-stream diagnostic nodes.
- 1440 Watts Power Output maintains industrial standard.
- USB and RS485 Interface Interfaces.
- External analog programming interface; Master/Slave connection up.
- Slew rate control for voltage and current;.
- 5 V / 1 A fixed auxiliary.
BK Precision XLN8018-GL DC Power Supply 80V/18A 1.44kW w/ GPIB/LAN
B&K Precision XLN8018-GL resolves common instrumentation bottlenecks during localized DC power delivery configurations allowing engineering facilities to maintain complete traceability under full operational loads.
- 1440 Watts Power Output supports professional standard.
- Compact, high density 1U package Form Factor.
- USB, RS485, GPIB, and LAN interfaces Connectivity.
- Programmable V & I slew rate; Master/Slave.
- 5 V / 1 A fixed output.
Cal Test Electronics 1320 Triple Output High Resolution DC Power Supply 32V/3A
Cal Test Electronics 1320 executes high-fidelity signal mapping during intensive DC power supply automation diagnostic routines ensuring compliance with current US metrology standards and laboratory protocols.
- 3 Independent Outputs Output Configuration.
- Separate 4-digit high-resolution displays for V and.
- Independent, Series, or Parallel connectivity for greater.
- CV / CC with automatic crossover Regulation.
- Overload indication LED for the fixed 5V.
Cal Test Electronics 1350 Triple Output Programmable DC Power Supply
Cal Test Electronics 1350 addresses strict calibration tolerance limits inside active DC power supply automation environments to eliminate structural measurement drift across intensive hardware evaluation cycles.
- Floating outputs; Series operation yields 0-64V, 0-3A.
- 4 separate LED displays Display.
- Fully programmable control, data storage, and data.
- Automatic program execution capability at preset times.
- High stability design with minimized drift Performance.
Cal Test Electronics 1403 Triple Output DC Power Supply 1-20VDC 100W
Cal Test Electronics 1403 integrates seamlessly into automated DC power supply automation system architectures to secure absolute baseline data accuracy and minimize diagnostic overhead.
- 1-20 VDC | 5 A Max Output.
- Aux 1: 3.3 or 5 VDC at.
- Illuminated LCD indicators Display Type.
- CV/CC mode with automatic crossover Operational Modes.
- Coarse & fine voltage/current controls; Compact slim.
Cal Test Electronics 1405 Triple Output DC Power Supply 1-36VDC 100W
Cal Test Electronics 1405 addresses strict calibration tolerance limits inside active DC power module automation environments allowing engineering facilities to maintain complete traceability under full operational loads.
- 1-36 VDC | 3 A Max Output.
- Aux 1: 3.3 or 5 VDC at.
- Illuminated LCD indicators Display Type.
- CV/CC mode with automatic crossover Operational Modes.
- Coarse & fine voltage/current controls; Compact slim.
Cal Test Electronics 1410 Single Output DC Power Supply 90W
Cal Test Electronics 1410 supports professional laboratory teams managing high-priority DC power supply automation setups minimizing standard calculation uncertainties in production-level testing cells.
- 0-30 V | 3 A | 90.
- Coarse and fine adjust knobs Control Resolution.
- Excellent line and load regulations; Low ripple.
- Connect in series or parallel; Master/Slave configuration.
- Overload, short circuit, and over current protections.
Cal Test Electronics 1415 Dual Output DC Power Supply 30V/3A & 5V/3A
Cal Test Electronics 1415 integrates seamlessly into automated DC power supply automation system architectures to secure absolute baseline data accuracy and minimize diagnostic overhead.
- Two Independent Supplies Output Configuration.
- Separate 3-digit LED displays for voltage and.
- CV / CC mode with LED indication.
- Overload indication LED for the fixed 5V.
- Selectable 120/240 VAC input voltage on rear.
Elektro-Automatik EA-PS 2042-06B DC Power Supply 42V/6A 100W
Elektro-Automatik EA-PS 2042-06B optimizes overall data acquisition throughput for critical DC power supply automation applications allowing engineering facilities to maintain complete traceability under full operational loads.
- 0 - 42 V | 0 -.
- Schools, university, laboratories, workshop and test institutes.
- Four-digit display for voltage and current Display.
- Microprocessor controlled; Chassis top and bottom closed.
- Convection or fan cooling Thermal Management.
Elektro-Automatik EA-PS 2042-10B DC Power Supply 42V/10A 160W
Elektro-Automatik EA-PS 2042-10B addresses strict calibration tolerance limits inside active DC power supply automation environments to eliminate structural measurement drift across intensive hardware evaluation cycles.
- 0 - 42 V | 0 -.
- Schools, university, laboratories, workshop and test institutes.
- Four-digit display for voltage and current Display.
- Microprocessor controlled; Chassis top and bottom closed.
- Convection or fan cooling Thermal Management.
Elektro-Automatik EA-PS 2042-20B DC Power Supply 42V/20A 320W
Elektro-Automatik EA-PS 2042-20B executes high-fidelity signal mapping during intensive DC power supply automation diagnostic routines ensuring compliance with current US metrology standards and laboratory protocols.
- 0 - 42 V | 0 -.
- Schools, university, laboratories, workshop and test institutes.
- Four-digit display for voltage and current Display.
- Microprocessor controlled; Chassis top and bottom closed.
- Convection or fan cooling Thermal Management.
Elektro-Automatik EA-PS 2084-03B DC Power Supply 84V/3A 100W
Elektro-Automatik EA-PS 2084-03B integrates seamlessly into automated DC power supply automation system architectures to secure absolute baseline data accuracy and minimize diagnostic overhead.
- 0 - 84 V | 0 -.
- Schools, university, laboratories, workshop and test institutes.
- Four-digit display for voltage and current Display.
- Microprocessor controlled; Chassis top and bottom closed.
- Convection or fan cooling Thermal Management.
Elektro-Automatik EA-PS 2084-05B DC Power Supply 84V/5A 160W
Elektro-Automatik EA-PS 2084-05B serves as a primary benchmarking asset for advanced DC power supply automation operations protecting delicate tracking parameters from external ambient and physical disruptions.
- 0 - 84 V | 0 -.
- Schools, university, laboratories, workshop and test institutes.
- Four-digit display for voltage and current Display.
- Microprocessor controlled; Chassis top and bottom closed.
- Convection or fan cooling Thermal Management.