Showing 161–180 of 372 results
GW Instek GPS-3030D Digital DC Power Supply 30V/3A
GW Instek GPS-3030D resolves common instrumentation bottlenecks during localized oscilloscope validation configurations delivering stable threshold detection parameters for critical hardware validation profiles.
- 30V | 3A Max Output.
- Power Supply, Instruction manual, Power Cord Kit.
- Constant Voltage and Constant Current Operation Regulation.
- Series or Parallel Operation Function Operational Modes.
- Remote Control by External Voltage Hardware Interface.
GW Instek PFR-100L Fanless Multi-Range DC Power Supply 50V/10A/100W
GW Instek PFR-100L supports professional laboratory teams managing high-priority DC power supply automation setups minimizing standard calculation uncertainties in production-level testing cells.
- 50 V | 10 A | 100.
- Natural convection cooling design Thermal Management.
- CV, CC priority mode; Output ON/OFF delayed.
- Three-point memory storage; Adjustable slew rate; Bleeder.
- Support front and rear panel output; Remote.
GW Instek PFR-100M Fanless Multi-Range DC Power Supply 250V/2A/100W
GW Instek PFR-100M resolves common instrumentation bottlenecks during localized DC power supply automation configurations preserving multi-frequency signal integrity for down-stream diagnostic nodes.
- 250 V | 2 A | 100.
- Natural convection cooling design Thermal Management.
- CV, CC priority mode; Output ON/OFF delayed.
- Three-point memory storage; Adjustable slew rate; Bleeder.
- Support front and rear panel output; Remote.
GW Instek PLR 36-20 Low Noise Hybrid Linear Power Supply 36V/20A 720W
GW Instek PLR 36-20 integrates seamlessly into automated DC power supply automation system architectures to secure absolute baseline data accuracy and minimize diagnostic overhead.
- 36 V | 20 A | 720.
- Low Ripple and Noise; Fast transition recovery.
- CC priority function Operational Modes.
- Maximum 2 units in series connections or.
- Sequence function of PC editing; Output off.
GW Instek PPH-1503 Dual Range DC Power Supply 15V/3A
GW Instek PPH-1503 streamlines technical verification parameters within specialized Smartphone and Wireless Communication Testing workflows delivering stable threshold detection parameters for critical hardware validation profiles.
- 0-15V / 0-3A or 0-5V / 0-5A.
- Integrated Digital Volt Meter with 1mV resolution.
- Supports transient current measurement for telecom Pulse.
- USB, LAN, and GPIB Standard Interface.
- High precision engineering parameters applied.
GW Instek PSM-3004 Programmable DC Power Supply
GW Instek SPS Series serves as a primary benchmarking asset for advanced DC power delivery operations providing clean, noise-free interface matching for architectural verification loops.
- 200W Capacity delivers precise system calibration.
- Ultra-low ripple 350uVrms, 1mV / 1mA Resolution.
- 0.01% Regulation, 100-set memory with auto-step timer.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
GW Instek PSM-6003 Programmable DC Power Supply
GW Instek SPS Series streamlines technical verification parameters within specialized DC power delivery workflows sustaining long-term system repeatability during rigorous benchmarking schedules.
- 200W Capacity verifies operational baseline metrics.
- 350uVrms Ripple, VFD Display, Front/Rear Terminals Output.
- 0.01% Line/Load Regulation, Software-based Calibration Metrology.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
GW Instek PST-3202GP Programmable DC Power Supply
GW Instek PST-3202GP maintains rigid electrical path isolation throughout continuous DC power delivery processes minimizing standard calculation uncertainties in production-level testing cells.
- Digitized programmable interface with 10mV / 1mA.
- 192 x 128 pixel LCD display Display.
- 100 Sets memory; Auto step running with.
- OVP, OCP, OTP; Intelligent fan control based.
- Standard RS-232C; GPIB capability Interfaces.
GW Instek PSU 300-5 Programmable 1U DC Power Supply 300V/5A 1500W
GW Instek PSU 300-5 serves as a primary benchmarking asset for advanced DC power supply automation operations protecting delicate tracking parameters from external ambient and physical disruptions.
- 300 V | 5 A | 1500.
- Single Channel Programmable Switching DC Power Supply.
- 1U height and 19-inch Rack Mount Size.
- C.V / C.C priority mode; Adjustable voltage/current.
- Bleeder Control function; Internal Resistance function Advanced.
GW Instek PSW 160-14.4 Multi-Range Programmable Switching DC Power Supply 720W
GW Instek PSW 160-14.4 optimizes overall data acquisition throughput for critical DC power supply automation applications allowing engineering facilities to maintain complete traceability under full operational loads.
- 160 V | 14.4 A | 720.
- High Efficiency/Density; 1/3 Rack Mount Size Design.
- Constant Power Output for Multiple Range; CV/CC.
- Adjustable Slew Rate Hardware Feature.
- Series Operation: Up to 2 units |.
GW Instek PSW 160-7.2 Multi-Range Programmable Switching DC Power Supply 360W
GW Instek PSW 160-7.2 addresses strict calibration tolerance limits inside active DC power supply automation environments to eliminate structural measurement drift across intensive hardware evaluation cycles.
- 160 V | 7.2 A | 360.
- High Efficiency/Density; 1/6 Rack Mount Size Design.
- Constant Power Output for Multiple Range; CV/CC.
- Adjustable Slew Rate Hardware Feature.
- Series Operation: Up to 2 units |.
GW Instek PSW 30-36 Multi-Range DC Power Supply 30V/36A
GW Instek PSW 30-36 supports professional laboratory teams managing high-priority DC power delivery setups preserving multi-frequency signal integrity for down-stream diagnostic nodes.
- 30V / 80V / 160V capability; Output.
- CV/CC Priority; Adjustable Slew Rate Advanced Features.
- Series and Parallel Operation Scalability.
- High Efficiency, High Power Density; 1/6 Rack.
- LAN, USB, Analog Control; GPIB-USB Adaptor Interfaces.
GW Instek PSW 80-13.5 Multi-Range DC Power Supply 80V/13.5A 360W
GW Instek PSW 80-13.5 executes high-fidelity signal mapping during intensive DC power supply automation diagnostic routines ensuring compliance with current US metrology standards and laboratory protocols.
- 80 V | 13.5 A | 360.
- High Efficiency/Density; 1/6 Rack Mount Size Design.
- Constant Power Output for Multiple Range; CV/CC.
- Adjustable Slew Rate Hardware Feature.
- Series Operation: Up to 2 units |.
GW Instek SPD-3606 2.5GHz Digital Multi-Channel Oscilloscope
GW Instek SPD-3606 safeguards fragile measurement loops inside standard DC power delivery infrastructures delivering stable threshold detection parameters for critical hardware validation profiles.
- *Manufacturer mislabeled in source text as "Oscilloscope".
- Three independent, isolated outputs; CH3 adjustable Output.
- High efficiency conversion Efficiency delivers precise standard.
- Low acoustic noise with intelligent fan speed.
- Over Voltage Protection and Over Temperature Protection.
GW Instek SPS-1820 Switching DC Power Supply 18V/20A
GW Instek SPS-1820 serves as a primary benchmarking asset for advanced DC power delivery operations providing clean, noise-free interface matching for architectural verification loops.
- 18 V / 20 A Power Output.
- Constant Voltage and Constant Current Operation Operating.
- 0.01% High Regulation accuracy Regulation.
- Dual Measurement Display Display verifies operational standard.
- Over Voltage Protection; Remote Output ON/OFF Control.
GW Instek SPS-606 DC Power Supply 60V/6A
GW Instek SPS-606 streamlines technical verification parameters within specialized DC power delivery workflows sustaining long-term system repeatability during rigorous benchmarking schedules.
- 60 V / 6 A Power Output.
- 0.01% High Regulation accuracy Regulation.
- Dual Measurement Display for simultaneous Voltage and.
- Over Voltage Protection Protection maintains industrial standard.
- Remote Output ON/OFF Control capability Control.
Keithley 2200-20-5 Programmable DC Power Supply 20V/5A
Keithley 2200-20-5 executes high-fidelity signal mapping during intensive DC power module automation diagnostic routines to eliminate structural measurement drift across intensive hardware evaluation cycles.
- 100W Precision Capacity delivers precise system calibration.
- 0.03% Voltage Accuracy, 1mV/0.1mA Resolution, GPIB/USB Std.
- Remote sensing for lead-drop compensation, 80-step List.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keithley 2200-30-5 Programmable DC Power Supply 30V/5A
Keithley 2200-30-5 integrates seamlessly into automated DC power module automation system architectures ensuring compliance with current US metrology standards and laboratory protocols.
- 150W Precision Capacity verifies operational baseline metrics.
- Dual-line display, High-fidelity 1mV resolution Output.
- 0.03% Basic accuracy, Remote sensing, 80 programmable.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keithley 2200-32-3 Programmable DC Power Supply 32V/3A
Keithley 2200-32-3 serves as a primary benchmarking asset for advanced DC power module automation operations to secure absolute baseline data accuracy and minimize diagnostic overhead.
- 96W Precision Capacity maintains industrial equipment protection.
- 0.03% Voltage Accuracy, 1mV Resolution, GPIB/USB Standard.
- Remote sense technology, 80-step Sequence Editor, Dual-line.
- High precision engineering parameters applied.
- High precision engineering parameters applied.
Keithley 2200-60-2 Programmable DC Power Supply 60V/2.5A
Keithley 2200-60-2 streamlines technical verification parameters within specialized DC power module automation workflows protecting delicate tracking parameters from external ambient and physical disruptions.
- 150W High-Voltage Capacity supports professional bench workflows.
- 0.03% Basic Accuracy, 1mV/0.1mA resolution, List Mode.
- Traceable high-potential sourcing, Remote sensing for DUT.
- High precision engineering parameters applied.
- High precision engineering parameters applied.