Showing 2341–2360 of 12408 results
Sort:
Compliance West MP-BI-P-360J w/ Biphasic P 360J Output Volt 2kV
Compliance West MegaPulse Biphasic P 360J optimizes safety testing precision by delivering 2kV biphasic output pulses, simulating defibrillator waveforms for continuous production line medical device verification.
- Display Spec: Microprocessor Timing Control
- Hardware Precision: 360 Joules Stable
- Digital Interface: Autotrigger TestMinder Connectivity
- Power Range: Continuous Duty Cycle
- Field Usage: Biphasic Output Pulse Testing
$9,432.00
$9,432.00
Compliance West MP-BI-P-EN45502 w/ Surge Tester Biphasic P EN45502-2-2 Fig.112, 270V
Compliance West MegaPulse Biphasic P EN45502-2-2 resolves biphasic waveform verification requirements for medical implants, integrating an external interlock and ergonomic interface for high-efficiency safety sequences.
- Display Spec: Peak OC Meter
- Hardware Precision: Ergonomic Efficiency Logic
- Digital Interface: USB Testminder Interface
- Power Range: Up to 270V
- Field Usage: Figure 112 Surge Testing
$3,452.00
$3,452.00
Compliance West MP-DEFIB-SURGE-P-380 w/ Surge Tester Defib Surge P 380, EN45502-2-2
Compliance West MegaPulse Defib Surge P 380 accelerates implantable medical device certification by providing theoretical versus actual output graphs and push-button polarity reversal for rapid testing.
- Display Spec: Microcontroller Peak Indicator
- Diagnostic Precision: Residual Voltage Meter
- System Interface: Push-Button Polarity Control
- Power Range: Up to 380V
- Field Usage: EN45502-2-2 Medical Testing
$3,805.00
$3,805.00
Compliance West MP-DF-1A.2 w/ Surge Tester waveform, USB TestMinder, IGBT switch
Compliance West MegaPulse DF-1A.2 resolves cardiac lead isolation hurdles using IGBT switch technology, automating 490 test cycles for AAMI DF-1 Figure A.2 medical compliance.
- Display Spec: Meter Accuracy 5%
- Hardware Precision: IGBT Switch Technology
- System Interface: USB TestMinder Port
- Thermal Range: 15 to 40C
- Field Usage: AAMI DF-1 Isolation Test
$4,289.00
$4,289.00
Condec UPC5000BACB w/ Pressure Calibration Standard
Condec 61636 (UPC5000BACB) resolves comprehensive industrial gauge validation hurdles via a triple-range configuration and quick-connect manifold system, delivering ±0.05% FS accuracy across all three ranges.
- Display Spec: Triple precision gauge configuration interface
- Precision Metric: ±0.05% Full Scale per range precision
- Digital Interface: Quick-connect manifold pneumatic system
- Power Range: Manual pneumatic regulation (Up to 2,000 psi)
- Field Usage: Multi-range pneumatic standard for industrial audits
$3,946.00
$3,946.00
Condec UPC5000BBAA w/ Pressure Calibration Standard 1000/500/200psiG, 0.05%
Condec 55819 (UPC5000BBAA) streamlines field auditing of industrial pneumatic signals through high-visibility gauges and active thermal stability management, ensuring 0.05% FS accuracy for primary technician tools.
- Display Spec: Manual interface with high-visibility analog gauges
- Precision Metric: 0.05% Full Scale pneumatic accuracy
- Digital Interface: Quick-disconnect NPT pneumatic ports
- Power Range: Pneumatic flow via external nitrogen/gas source
- Field Usage: Primary technician tool for field pneumatic audits
$3,938.00
$3,938.00
Condec UPC5100 w/ Pressure Vacuum Calibration Std w/NIST Cal.Cert., No Data
Condec UPC5100BBA resolves portable pressure/vacuum source gaps by utilizing a self-contained nitrogen cylinder and precision regulators to ensure ±0.05% FS accuracy for high-precision field signal audits.
- Display Spec: Analog gauge display with manual control interface
- Precision Metric: ±0.05% Full Scale pneumatic accuracy
- Digital Interface: Quick-disconnect NPT pressure/vacuum ports
- Power Range: Self-contained nitrogen pneumatic operation
- Field Usage: Portable high-precision field signal integrity audits
$4,169.00
$4,169.00
Condec UPC5100BA w/ Pressure/Vacuum Calibration Standard
Condec UPC5100BA eliminates laboratory-to-field measurement drift using matched precision regulators and dual-mode pressure/vacuum ports to maintain ±0.05% FS accuracy for versatile sensor audits.
- Display Spec: Precision analog gauge manual reference display
- Precision Metric: ±0.05% Full Scale dual-mode accuracy
- Digital Interface: Universal quick-connect pressure/vacuum interface
- Power Range: Independent nitrogen supply compatible
- Field Usage: Laboratory and field pressure/vacuum sensor audits
$4,068.00
$4,068.00
Condec UPC5200DAB w/ Pressure Calibrator Standard 5000/2500/1000
Condec UPC5200DAB resolves nitrogen-based field calibration needs by utilizing selectable ranges up to 5,000 psi and quick-disconnect fittings to provide a portable "calibration lab in a box" for signal integrity validation.
- Display Spec: Ruggedized transit case interface
- Precision Metric: ±0.05% FS per range accuracy
- Digital Interface: Quick-disconnect pneumatic fittings
- Power Range: 0-5,000 / 0-2,500 / 0-1,000 psi
- Field Usage: Nitrogen-based field signal integrity validation
$7,848.00
$7,848.00
Condec UPS3110 Digital Pressure Standard / Calibrator
Condec UPS3110 eliminates manual calculation errors for analog gauge characterization via dual sensor architecture and programmable local gravity to provide ±0.05% FS laboratory accuracy.
- Display Spec: 6-digit digital display with 0.001% FS resolution
- Precision Metric: ±0.05% FS (Standard) to ±0.02% FS (Premium Option)
- Digital Interface: RS-232 and IEEE-488 (GPIB) for LabVIEW
- Power Range: Universal 115/230 VAC (0 to 10,000 psi)
- Field Usage: Lab standard for characterizing analog gauge coefficients
$2,902.00
$2,902.00
Condec UPS3110 w/ Digital Pressure Calibrator 500/250/100 Range, Rack Mnt.
Condec UPS3110ACC resolves multi-range pneumatic scale auditing gaps through a triple-range rack-mount configuration and digital thermal mapping to ensure ±0.05% FS accuracy per active range.
- Display Spec: 6-digit LCD with 0.001 psi resolution
- Precision Metric: ±0.05% FS per active range precision
- Digital Interface: RS-232 and IEEE-488 LabVIEW integration
- Power Range: 115/230 VAC (100, 250, and 500 psi ranges)
- Field Usage: Centralized lab standard for multi-scale pneumatic audits
$2,534.00
$2,534.00
Condec UPS3110 w/ Rack Mount Pneumatic Pressure Standard
Condec UPS3110AFCD (Rack Mount) resolves centralized laboratory calibration bottlenecks through a silicon piezoresistive sensor and rack-mount manifold system to provide ±0.05% FS accuracy for industrial coefficient characterization.
- Display Spec: 6-digit rack-mount digital standard display
- Precision Metric: ±0.05% Full Span (FS) precision
- Digital Interface: RS-232 and IEEE-488 LabVIEW integration
- Power Range: 115/230 VAC dual-voltage mains
- Field Usage: Centralized lab standard for characterizing gauge coefficients
$2,714.00
$2,714.00
